UPVC vs. FEP
Both uPVC and FEP are thermoplastics. There are 27 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown.
For each property being compared, the top bar is uPVC and the bottom bar is FEP.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 3.7 | |
0.43 |
Elongation at Break, % | 58 | |
300 |
Flexural Modulus, GPa | 3.5 | |
0.6 |
Flexural Strength, MPa | 80 | |
24 |
Tensile Strength: Ultimate (UTS), MPa | 47 | |
20 |
Thermal Properties
Glass Transition Temperature, °C | 85 | |
60 |
Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 69 | |
50 |
Heat Deflection Temperature At 455 kPa (66 psi), °C | 90 | |
70 |
Maximum Temperature: Autoignition, °C | 400 | |
630 |
Maximum Temperature: Mechanical, °C | 95 | |
200 |
Melting Onset (Solidus), °C | 180 | |
260 |
Specific Heat Capacity, J/kg-K | 880 | |
1170 |
Thermal Conductivity, W/m-K | 0.16 | |
0.22 |
Thermal Expansion, µm/m-K | 61 | |
95 |
Electrical Properties
Dielectric Constant (Relative Permittivity) At 1 Hz | 3.4 | |
1.9 |
Dielectric Strength (Breakdown Potential), kV/mm | 19 | |
22 |
Electrical Dissipation At 1 Hz | 0.013 | |
0.00026 |
Electrical Resistivity Order of Magnitude, 10x Ω-m | 15 | |
16 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.4 | |
2.1 |
Limiting Oxygen Index (LOI), % | 42 | |
80 |
Water Absorption After 24 Hours, % | 0.24 | |
0.010 |
Common Calculations
Stiffness to Weight: Axial, points | 1.5 | |
0.11 |
Stiffness to Weight: Bending, points | 37 | |
12 |
Strength to Weight: Axial, points | 9.1 | |
2.6 |
Strength to Weight: Bending, points | 20 | |
7.6 |
Thermal Diffusivity, mm2/s | 0.13 | |
0.088 |
Thermal Shock Resistance, points | 15 | |
35 |