UP vs. PEI
UP belongs to the thermoset plastics classification, while PEI belongs to the thermoplastics. There are 15 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown.
For each property being compared, the top bar is UP and the bottom bar is PEI.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 17 | |
| 3.4 to 5.6 |
| Elongation at Break, % | 1.0 | |
| 3.0 to 34 |
| Tensile Strength: Ultimate (UTS), MPa | 30 | |
| 110 to 160 |
Thermal Properties
| Glass Transition Temperature, °C | 60 | |
| 210 |
| Specific Heat Capacity, J/kg-K | 1200 | |
| 1050 to 1220 |
| Thermal Conductivity, W/m-K | 0.7 | |
| 0.18 to 0.23 |
| Thermal Expansion, µm/m-K | 3.0 | |
| 20 to 53 |
Otherwise Unclassified Properties
| Density, g/cm3 | 2.0 | |
| 1.3 to 1.5 |
| Limiting Oxygen Index (LOI), % | 20 | |
| 47 to 50 |
Common Calculations
| Stiffness to Weight: Axial, points | 4.7 | |
| 1.5 to 2.1 |
| Stiffness to Weight: Bending, points | 43 | |
| 39 |
| Strength to Weight: Axial, points | 4.2 | |
| 24 to 30 |
| Strength to Weight: Bending, points | 11 | |
| 40 to 44 |
| Thermal Diffusivity, mm2/s | 0.29 | |
| 0.11 to 0.14 |
| Thermal Shock Resistance, points | 42 | |
| 44 to 100 |