UP vs. PVF
UP belongs to the thermoset plastics classification, while PVF belongs to the thermoplastics. There are 10 material properties with values for both materials. Properties with values for just one material (14, in this case) are not shown.
For each property being compared, the top bar is UP and the bottom bar is PVF.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 2.0 | |
| 1.4 |
| Glass Transition Temperature, °C | 60 | |
| -20 |
| Limiting Oxygen Index (LOI), % | 20 | |
| 23 |
| Specific Heat Capacity, J/kg-K | 1200 | |
| 1300 |
| Strength to Weight: Axial, points | 4.2 | |
| 13 |
| Strength to Weight: Bending, points | 11 | |
| 26 |
| Tensile Strength: Ultimate (UTS), MPa | 30 | |
| 65 |
| Thermal Conductivity, W/m-K | 0.7 | |
| 0.13 |
| Thermal Diffusivity, mm2/s | 0.29 | |
| 0.071 |
| Thermal Expansion, µm/m-K | 3.0 | |
| 100 |