UF vs. ABS
UF belongs to the thermoset plastics classification, while ABS belongs to the thermoplastics. There are 11 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown.
For each property being compared, the top bar is UF and the bottom bar is ABS.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 9.0 | |
| 2.0 to 2.6 |
| Elongation at Break, % | 1.0 | |
| 3.5 to 50 |
| Tensile Strength: Ultimate (UTS), MPa | 30 | |
| 37 to 110 |
Thermal Properties
| Thermal Expansion, µm/m-K | 55 | |
| 81 to 95 |
Electrical Properties
| Dielectric Strength (Breakdown Potential), kV/mm | 35 | |
| 15 to 16 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.5 | |
| 1.0 to 1.4 |
Common Calculations
| Stiffness to Weight: Axial, points | 3.3 | |
| 0.79 to 1.4 |
| Stiffness to Weight: Bending, points | 46 | |
| 30 to 44 |
| Strength to Weight: Axial, points | 5.6 | |
| 10 to 22 |
| Strength to Weight: Bending, points | 14 | |
| 24 to 37 |
| Thermal Shock Resistance, points | 4.3 | |
| 11 to 50 |