UF vs. SBR Rubber
UF belongs to the thermoset plastics classification, while SBR rubber belongs to the thermoset elastomers (rubber). There are 8 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown.
For each property being compared, the top bar is UF and the bottom bar is SBR rubber.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.5 | |
| 1.1 |
| Elongation at Break, % | 1.0 | |
| 530 |
| Specific Heat Capacity, J/kg-K | 1200 | |
| 1880 |
| Strength to Weight: Axial, points | 5.6 | |
| 3.4 |
| Strength to Weight: Bending, points | 14 | |
| 11 |
| Tensile Strength: Ultimate (UTS), MPa | 30 | |
| 14 |
| Thermal Conductivity, W/m-K | 0.4 | |
| 0.17 |
| Thermal Diffusivity, mm2/s | 0.22 | |
| 0.082 |