MakeItFrom.com
Menu (ESC)

Zirconia vs. Machinable Glass-ceramic

Zirconia belongs to the oxide-based engineering ceramics classification, while machinable glass-ceramic belongs to the glass and glass-ceramics. There are 21 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is zirconia and the bottom bar is machinable glass-ceramic.

Metric UnitsUS Customary Units

Mechanical Properties

Compressive (Crushing) Strength, MPa 1260 to 3080
310
Elastic (Young's, Tensile) Modulus, GPa 190 to 200
67
Flexural Strength, MPa 630 to 970
96
Fracture Toughness, MPa-m1/2 8.0 to 11
2.5
Knoop Hardness 1210 to 1300
250
Poisson's Ratio 0.25 to 0.29
0.29
Tensile Strength: Ultimate (UTS), MPa 410 to 450
84

Thermal Properties

Maximum Temperature: Mechanical, °C 500 to 1330
760
Specific Heat Capacity, J/kg-K 400 to 510
790
Thermal Conductivity, W/m-K 2.2 to 4.3
1.2
Thermal Expansion, µm/m-K 8.8 to 9.5
21

Electrical Properties

Dielectric Constant (Relative Permittivity) At 1 MHz 28
6.4
Dielectric Strength (Breakdown Potential), kV/mm 7.7 to 9.0
27
Electrical Resistivity Order of Magnitude, 10x Ω-m 4.5 to 11
14

Otherwise Unclassified Properties

Density, g/cm3 5.7 to 6.0
2.7

Common Calculations

Stiffness to Weight: Axial, points 19
14
Stiffness to Weight: Bending, points 33 to 34
51
Strength to Weight: Axial, points 19 to 22
8.8
Strength to Weight: Bending, points 21 to 23
16
Thermal Diffusivity, mm2/s 0.73 to 1.8
0.56
Thermal Shock Resistance, points 15 to 19
4.3