3/4-Hard (H03) C42200 Brass
H03 C42200 brass is C42200 brass in the H03 (3/4 hard) temper. The graph bars on the material properties cards below compare H03 C42200 brass to: wrought brasses (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
110 GPa 16 x 106 psi
Elongation at Break
6.0 %
Poisson's Ratio
0.33
Rockwell B Hardness
77
Rockwell Superficial 30T Hardness
68
Shear Modulus
42 GPa 6.1 x 106 psi
Shear Strength
270 MPa 38 x 103 psi
Tensile Strength: Ultimate (UTS)
460 MPa 66 x 103 psi
Tensile Strength: Yield (Proof)
430 MPa 62 x 103 psi
Thermal Properties
Latent Heat of Fusion
200 J/g
Maximum Temperature: Mechanical
170 °C 350 °F
Melting Completion (Liquidus)
1040 °C 1910 °F
Melting Onset (Solidus)
1020 °C 1870 °F
Specific Heat Capacity
380 J/kg-K 0.092 BTU/lb-°F
Thermal Conductivity
130 W/m-K 75 BTU/h-ft-°F
Thermal Expansion
18 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
31 % IACS
Electrical Conductivity: Equal Weight (Specific)
32 % IACS
Otherwise Unclassified Properties
Base Metal Price
29 % relative
Density
8.6 g/cm3 540 lb/ft3
Embodied Carbon
2.7 kg CO2/kg material
Embodied Energy
44 MJ/kg 19 x 103 BTU/lb
Embodied Water
320 L/kg 38 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
27 MJ/m3
Resilience: Unit (Modulus of Resilience)
820 kJ/m3
Stiffness to Weight: Axial
7.2 points
Stiffness to Weight: Bending
19 points
Strength to Weight: Axial
15 points
Strength to Weight: Bending
15 points
Thermal Diffusivity
39 mm2/s
Thermal Shock Resistance
16 points
Alloy Composition
| Cu | 86 to 89 | |
| Zn | 8.7 to 13.2 | |
| Sn | 0.8 to 1.4 | |
| P | 0 to 0.35 | |
| Fe | 0 to 0.050 | |
| Pb | 0 to 0.050 | |
| res. | 0 to 0.5 |
All values are % weight. Ranges represent what is permitted under applicable standards.