7075-T73511 Aluminum
7075-T73511 aluminum is 7075 aluminum in the T73511 temper. To achieve this temper, the metal is solution heat-treated, stress relieved, then stabilized by artificial overaging. The stress relief is accomplished by stretching the metal by an amount that depends on the type of standard wrought product being made (extrusion or tube). The degree of overaging is chosen so as to maximize stress corrosion resistance. The metal is straightened after the stretching operation. This temper is closely related to T73510, which does not permit such straightening.
The graph bars on the material properties cards below compare 7075-T73511 aluminum to: 7000-series alloys (top), all aluminum alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
70 GPa 10 x 106 psi
Elongation at Break
8.0 %
Fatigue Strength
170 MPa 24 x 103 psi
Poisson's Ratio
0.32
Shear Modulus
26 GPa 3.8 x 106 psi
Shear Strength
300 MPa 44 x 103 psi
Tensile Strength: Ultimate (UTS)
510 MPa 74 x 103 psi
Tensile Strength: Yield (Proof)
420 MPa 61 x 103 psi
Thermal Properties
Latent Heat of Fusion
380 J/g
Maximum Temperature: Mechanical
200 °C 400 °F
Melting Completion (Liquidus)
640 °C 1180 °F
Melting Onset (Solidus)
480 °C 890 °F
Specific Heat Capacity
870 J/kg-K 0.21 BTU/lb-°F
Thermal Conductivity
130 W/m-K 75 BTU/h-ft-°F
Thermal Expansion
23 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
33 % IACS
Electrical Conductivity: Equal Weight (Specific)
98 % IACS
Otherwise Unclassified Properties
Base Metal Price
10 % relative
Calomel Potential
-750 mV
Density
3.0 g/cm3 190 lb/ft3
Embodied Carbon
8.3 kg CO2/kg material
Embodied Energy
150 MJ/kg 64 x 103 BTU/lb
Embodied Water
1120 L/kg 130 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
38 MJ/m3
Resilience: Unit (Modulus of Resilience)
1240 kJ/m3
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
46 points
Strength to Weight: Axial
47 points
Strength to Weight: Bending
47 points
Thermal Diffusivity
50 mm2/s
Thermal Shock Resistance
22 points
Alloy Composition
| Al | 86.9 to 91.4 | |
| Zn | 5.1 to 6.1 | |
| Mg | 2.1 to 2.9 | |
| Cu | 1.2 to 2.0 | |
| Fe | 0 to 0.5 | |
| Cr | 0.18 to 0.28 | |
| Si | 0 to 0.4 | |
| Mn | 0 to 0.3 | |
| Zr | 0 to 0.25 | |
| Ti | 0 to 0.2 | |
| res. | 0 to 0.15 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
EN 754-2: Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties
ASTM B209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
Pressure Vessels: External Pressure Technology, 2nd ed., Carl T. F. Ross, 2011
EN 755-2: Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties
Aluminum Standards and Data, Aluminum Association Inc., 2013
ASM Specialty Handbook: Aluminum and Aluminum Alloys, J. R. Davis (editor), 1993
EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products