7075-T76511 Aluminum
7075-T76511 aluminum is 7075 aluminum in the T76511 temper. To achieve this temper, the metal is solution heat-treated, stress relieved, then stabilized by artificial overaging. The stress relief is accomplished by stretching the metal by an amount that depends on the type of standard wrought product being made (extrusion or tube). The degree of overaging is chosen so as to maximize exfoliation corrosion resistance. The metal is straightened after the stretching operation. This temper is closely related to T76510, which does not permit such straightening.
The graph bars on the material properties cards below compare 7075-T76511 aluminum to: 7000-series alloys (top), all aluminum alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
70 GPa 10 x 106 psi
Elongation at Break
6.7 %
Fatigue Strength
190 MPa 28 x 103 psi
Poisson's Ratio
0.32
Shear Modulus
26 GPa 3.8 x 106 psi
Shear Strength
330 MPa 48 x 103 psi
Tensile Strength: Ultimate (UTS)
560 MPa 81 x 103 psi
Tensile Strength: Yield (Proof)
500 MPa 72 x 103 psi
Thermal Properties
Latent Heat of Fusion
380 J/g
Maximum Temperature: Mechanical
200 °C 400 °F
Melting Completion (Liquidus)
640 °C 1180 °F
Melting Onset (Solidus)
480 °C 890 °F
Specific Heat Capacity
870 J/kg-K 0.21 BTU/lb-°F
Thermal Conductivity
130 W/m-K 75 BTU/h-ft-°F
Thermal Expansion
23 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
33 % IACS
Electrical Conductivity: Equal Weight (Specific)
98 % IACS
Otherwise Unclassified Properties
Base Metal Price
10 % relative
Calomel Potential
-750 mV
Density
3.0 g/cm3 190 lb/ft3
Embodied Carbon
8.3 kg CO2/kg material
Embodied Energy
150 MJ/kg 64 x 103 BTU/lb
Embodied Water
1120 L/kg 130 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
36 MJ/m3
Resilience: Unit (Modulus of Resilience)
1750 kJ/m3
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
46 points
Strength to Weight: Axial
52 points
Strength to Weight: Bending
50 points
Thermal Diffusivity
50 mm2/s
Thermal Shock Resistance
24 points
Alloy Composition
| Al | 86.9 to 91.4 | |
| Zn | 5.1 to 6.1 | |
| Mg | 2.1 to 2.9 | |
| Cu | 1.2 to 2.0 | |
| Fe | 0 to 0.5 | |
| Cr | 0.18 to 0.28 | |
| Si | 0 to 0.4 | |
| Mn | 0 to 0.3 | |
| Zr | 0 to 0.25 | |
| Ti | 0 to 0.2 | |
| res. | 0 to 0.15 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM B221: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
Pressure Vessels: External Pressure Technology, 2nd ed., Carl T. F. Ross, 2011
EN 755-2: Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties
Aluminum Standards and Data, Aluminum Association Inc., 2013
ASM Specialty Handbook: Aluminum and Aluminum Alloys, J. R. Davis (editor), 1993
EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products