AISI 430FSe (S43023) Stainless Steel
AISI 430FSe stainless steel is a ferritic stainless steel formulated for primary forming into wrought products. Cited properties are appropriate for the annealed condition. 430FSe is the AISI designation for this material. S43023 is the UNS number.
It has a moderately low embodied energy among the wrought ferritic stainless steels in the database.
The graph bars on the material properties cards below compare AISI 430FSe stainless steel to: wrought ferritic stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Brinell Hardness
230
Elastic (Young's, Tensile) Modulus
200 GPa 29 x 106 psi
Elongation at Break
23 %
Fatigue Strength
210 MPa 31 x 103 psi
Poisson's Ratio
0.28
Reduction in Area
50 %
Shear Modulus
77 GPa 11 x 106 psi
Shear Strength
340 MPa 50 x 103 psi
Tensile Strength: Ultimate (UTS)
540 MPa 79 x 103 psi
Tensile Strength: Yield (Proof)
310 MPa 45 x 103 psi
Thermal Properties
Latent Heat of Fusion
280 J/g
Maximum Temperature: Corrosion
410 °C 770 °F
Maximum Temperature: Mechanical
870 °C 1590 °F
Melting Completion (Liquidus)
1440 °C 2620 °F
Melting Onset (Solidus)
1390 °C 2540 °F
Specific Heat Capacity
480 J/kg-K 0.11 BTU/lb-°F
Thermal Conductivity
25 W/m-K 15 BTU/h-ft-°F
Thermal Expansion
10 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
2.9 % IACS
Electrical Conductivity: Equal Weight (Specific)
3.4 % IACS
Otherwise Unclassified Properties
Base Metal Price
8.5 % relative
Density
7.7 g/cm3 480 lb/ft3
Embodied Carbon
2.1 kg CO2/kg material
Embodied Energy
30 MJ/kg 13 x 103 BTU/lb
Embodied Water
120 L/kg 14 gal/lb
Common Calculations
PREN (Pitting Resistance)
17
Resilience: Ultimate (Unit Rupture Work)
110 MJ/m3
Resilience: Unit (Modulus of Resilience)
250 kJ/m3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
25 points
Strength to Weight: Axial
20 points
Strength to Weight: Bending
19 points
Thermal Diffusivity
6.8 mm2/s
Thermal Shock Resistance
19 points
Alloy Composition
Among wrought stainless steels, the composition of AISI 430FSe stainless steel is notable for containing a comparatively high amount of chromium (Cr). Chromium is the defining alloying element of stainless steel. Higher chromium content imparts additional corrosion resistance.
| Fe | 79.5 to 84 | |
| Cr | 16 to 18 | |
| Mn | 0 to 1.3 | |
| Si | 0 to 1.0 | |
| C | 0 to 0.12 | |
| P | 0 to 0.060 | |
| S | 0 to 0.060 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Similar Alloys
Further Reading
ASTM A895: Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
ASTM A473: Standard Specification for Stainless Steel Forgings
Metallic Materials: Physical, Mechanical, and Corrosion Properties, Philip A. Schweitzer, 2003
Advanced Materials in Automotive Engineering, Jason Rowe (editor), 2012
ASTM A959: Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
Corrosion of Stainless Steels, A. John Sedriks, 1996
ASM Specialty Handbook: Stainless Steels, J. R. Davis (editor), 1994
Advances in Stainless Steels, Baldev Raj et al. (editors), 2010