AM100A-F Magnesium
AM100A-F magnesium is AM100A magnesium in the as-fabricated (no temper or treatment) condition. It has the lowest strength compared to the other variants of AM100A magnesium. The graph bars on the material properties cards below compare AM100A-F magnesium to other magnesium alloys (top) and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
46 GPa 6.7 x 106 psi
Elongation at Break
3.8 %
Fatigue Strength
48 MPa 7.0 x 103 psi
Poisson's Ratio
0.29
Shear Modulus
18 GPa 2.6 x 106 psi
Shear Strength
90 MPa 13 x 103 psi
Tensile Strength: Ultimate (UTS)
160 MPa 23 x 103 psi
Tensile Strength: Yield (Proof)
78 MPa 11 x 103 psi
Thermal Properties
Latent Heat of Fusion
350 J/g
Maximum Temperature: Mechanical
140 °C 280 °F
Melting Completion (Liquidus)
590 °C 1100 °F
Melting Onset (Solidus)
460 °C 870 °F
Solidification (Pattern Maker's) Shrinkage
1.3 %
Specific Heat Capacity
990 J/kg-K 0.24 BTU/lb-°F
Thermal Conductivity
73 W/m-K 42 BTU/h-ft-°F
Thermal Expansion
25 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
11 % IACS
Electrical Conductivity: Equal Weight (Specific)
59 % IACS
Otherwise Unclassified Properties
Base Metal Price
12 % relative
Density
1.7 g/cm3 110 lb/ft3
Embodied Carbon
22 kg CO2/kg material
Embodied Energy
160 MJ/kg 68 x 103 BTU/lb
Embodied Water
1000 L/kg 120 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
4.9 MJ/m3
Resilience: Unit (Modulus of Resilience)
66 kJ/m3
Stiffness to Weight: Axial
15 points
Stiffness to Weight: Bending
70 points
Strength to Weight: Axial
25 points
Strength to Weight: Bending
38 points
Thermal Diffusivity
43 mm2/s
Thermal Shock Resistance
9.7 points
Alloy Composition
| Mg | 87.9 to 90.6 | |
| Al | 9.3 to 10.7 | |
| Mn | 0.1 to 0.35 | |
| Si | 0 to 0.3 | |
| Zn | 0 to 0.3 | |
| Cu | 0 to 0.1 | |
| Ni | 0 to 0.010 | |
| res. | 0 to 0.3 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM B199: Standard Specification for Magnesium-Alloy Permanent Mold Castings
ASTM B403: Standard Specification for Magnesium-Alloy Investment Castings
Welding and Joining of Magnesium Alloys, Liming Liu (editor), 2010
ASTM B80: Standard Specification for Magnesium-Alloy Sand Castings
Essential Readings in Magnesium Technology, Suveen N. Mathaudhu et al. (editors), 2014
CRC Materials Science and Engineering Handbook, 4th ed., James F. Shackelford et al. (editors), 2015