Annealed 90-Silver 10-Cadmium-Oxide Alloy
Annealed 90-silver 10-cadmium-oxide is 90-silver 10-cadmium-oxide in the annealed condition. It has the lowest strength and highest ductility compared to the other variants of 90-silver 10-cadmium-oxide.
The graph bars on the material properties cards below compare annealed 90-silver 10-cadmium-oxide to: precious metal electrical contact alloys (top), all alloys in the same category (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elongation at Break
28 %
Shear Strength
170 MPa 24 x 103 psi
Tensile Strength: Ultimate (UTS)
260 MPa 37 x 103 psi
Other Material Properties
Density
10 g/cm3 640 lb/ft3
Electrical Conductivity: Equal Volume
100 % IACS
Electrical Conductivity: Equal Weight (Specific)
91 % IACS
Common Calculations
Strength to Weight: Axial
7.0 points
Strength to Weight: Bending
8.8 points
Followup Questions
Further Reading
ASTM B781: Standard Guide for Silver-Cadmium Oxide Contact Material