Annealed (A or TB00) C18200 Copper
TB00 C18200 copper is C18200 copper in the TB00 (solution heat treated) temper. It has the lowest strength and highest ductility compared to the other variants of C18200 copper. The graph bars on the material properties cards below compare TB00 C18200 copper to: wrought coppers (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
120 GPa 17 x 106 psi
Elongation at Break
40 %
Poisson's Ratio
0.34
Shear Modulus
44 GPa 6.3 x 106 psi
Shear Strength
210 MPa 31 x 103 psi
Tensile Strength: Ultimate (UTS)
310 MPa 45 x 103 psi
Tensile Strength: Yield (Proof)
97 MPa 14 x 103 psi
Thermal Properties
Latent Heat of Fusion
210 J/g
Maximum Temperature: Mechanical
200 °C 390 °F
Melting Completion (Liquidus)
1080 °C 1970 °F
Melting Onset (Solidus)
1070 °C 1960 °F
Specific Heat Capacity
390 J/kg-K 0.093 BTU/lb-°F
Thermal Conductivity
320 W/m-K 190 BTU/h-ft-°F
Thermal Expansion
18 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
80 % IACS
Electrical Conductivity: Equal Weight (Specific)
81 % IACS
Otherwise Unclassified Properties
Base Metal Price
31 % relative
Density
8.9 g/cm3 560 lb/ft3
Embodied Carbon
2.6 kg CO2/kg material
Embodied Energy
41 MJ/kg 18 x 103 BTU/lb
Embodied Water
310 L/kg 37 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
96 MJ/m3
Resilience: Unit (Modulus of Resilience)
40 kJ/m3
Stiffness to Weight: Axial
7.3 points
Stiffness to Weight: Bending
18 points
Strength to Weight: Axial
9.6 points
Strength to Weight: Bending
11 points
Thermal Diffusivity
93 mm2/s
Thermal Shock Resistance
11 points
Alloy Composition
| Cu | 98.6 to 99.4 | |
| Cr | 0.6 to 1.2 | |
| Si | 0 to 0.1 | |
| Fe | 0 to 0.1 | |
| Pb | 0 to 0.050 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
Copper: Its Trade, Manufacture, Use, and Environmental Status, Gunter Joseph, 2001
Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook vol. 2, ASM International, 1993