Annealed H14 Tool Steel
Annealed SAE-AISI H14 is SAE-AISI H14 steel in the annealed condition. The graph bars on the material properties cards below compare annealed SAE-AISI H14 to: tool steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Brinell Hardness
210
Elastic (Young's, Tensile) Modulus
190 GPa 28 x 106 psi
Poisson's Ratio
0.29
Shear Modulus
75 GPa 11 x 106 psi
Tensile Strength: Ultimate (UTS)
710 MPa 100 x 103 psi
Thermal Properties
Latent Heat of Fusion
270 J/g
Melting Completion (Liquidus)
1530 °C 2790 °F
Melting Onset (Solidus)
1490 °C 2710 °F
Specific Heat Capacity
460 J/kg-K 0.11 BTU/lb-°F
Thermal Conductivity
35 W/m-K 20 BTU/h-ft-°F
Thermal Expansion
11 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
9.3 % IACS
Electrical Conductivity: Equal Weight (Specific)
10 % IACS
Otherwise Unclassified Properties
Base Metal Price
15 % relative
Density
8.1 g/cm3 510 lb/ft3
Embodied Carbon
2.7 kg CO2/kg material
Embodied Energy
39 MJ/kg 17 x 103 BTU/lb
Embodied Water
73 L/kg 8.7 gal/lb
Common Calculations
PREN (Pitting Resistance)
13
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
24 points
Strength to Weight: Axial
24 points
Strength to Weight: Bending
22 points
Thermal Diffusivity
9.3 mm2/s
Thermal Shock Resistance
24 points
Alloy Composition
| Fe | 86.5 to 89.9 | |
| Cr | 4.8 to 5.5 | |
| W | 4.0 to 5.3 | |
| Si | 0.8 to 1.2 | |
| C | 0.35 to 0.45 | |
| Mn | 0.2 to 0.5 | |
| Ni | 0 to 0.3 | |
| Cu | 0 to 0.25 | |
| P | 0 to 0.030 | |
| S | 0 to 0.030 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM A681: Standard Specification for Tool Steels Alloy
Tool Steels, 5th ed., George Roberts et al., 1998
Tool Steels: Properties and Performance, Rafael A. Mesquita (editor), 2016
ASM Specialty Handbook: Carbon and Alloy Steels, J. R. Davis (editor), 1996