As Hot Rolled (M20) C52400 Bronze
M20 C52400 bronze is C52400 bronze in the M20 (as hot rolled) condition. It has the lowest strength compared to the other variants of C52400 bronze. The graph bars on the material properties cards below compare M20 C52400 bronze to: wrought bronzes (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
110 GPa 16 x 106 psi
Poisson's Ratio
0.34
Shear Modulus
41 GPa 5.9 x 106 psi
Tensile Strength: Ultimate (UTS)
450 MPa 65 x 103 psi
Thermal Properties
Latent Heat of Fusion
190 J/g
Maximum Temperature: Mechanical
170 °C 340 °F
Melting Completion (Liquidus)
1000 °C 1830 °F
Melting Onset (Solidus)
840 °C 1550 °F
Specific Heat Capacity
370 J/kg-K 0.088 BTU/lb-°F
Thermal Conductivity
50 W/m-K 29 BTU/h-ft-°F
Thermal Expansion
18 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
11 % IACS
Electrical Conductivity: Equal Weight (Specific)
11 % IACS
Otherwise Unclassified Properties
Base Metal Price
35 % relative
Density
8.8 g/cm3 550 lb/ft3
Embodied Carbon
3.6 kg CO2/kg material
Embodied Energy
58 MJ/kg 25 x 103 BTU/lb
Embodied Water
390 L/kg 46 gal/lb
Common Calculations
Stiffness to Weight: Axial
6.9 points
Stiffness to Weight: Bending
18 points
Strength to Weight: Axial
14 points
Strength to Weight: Bending
15 points
Thermal Diffusivity
15 mm2/s
Thermal Shock Resistance
17 points
Alloy Composition
| Cu | 87.8 to 91 | |
| Sn | 9.0 to 11 | |
| P | 0.030 to 0.35 | |
| Zn | 0 to 0.2 | |
| Fe | 0 to 0.1 | |
| Pb | 0 to 0.050 | |
| res. | 0 to 0.5 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM B103: Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
ASM Specialty Handbook: Copper and Copper Alloys, J. R. Davis (editor), 2001
CRC Materials Science and Engineering Handbook, 4th ed., James F. Shackelford et al. (editors), 2015