As Hot Rolled (M20) C70600 Copper-Nickel
M20 C70600 copper-nickel is C70600 copper-nickel in the M20 (as hot rolled) condition. The graph bars on the material properties cards below compare M20 C70600 copper-nickel to: wrought copper-nickels (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
120 GPa 18 x 106 psi
Poisson's Ratio
0.34
Shear Modulus
46 GPa 6.7 x 106 psi
Tensile Strength: Ultimate (UTS)
350 MPa 51 x 103 psi
Thermal Properties
Latent Heat of Fusion
220 J/g
Maximum Temperature: Mechanical
220 °C 430 °F
Melting Completion (Liquidus)
1150 °C 2100 °F
Melting Onset (Solidus)
1100 °C 2010 °F
Specific Heat Capacity
390 J/kg-K 0.094 BTU/lb-°F
Thermal Conductivity
44 W/m-K 26 BTU/h-ft-°F
Thermal Expansion
17 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
9.8 % IACS
Electrical Conductivity: Equal Weight (Specific)
9.9 % IACS
Otherwise Unclassified Properties
Base Metal Price
33 % relative
Calomel Potential
-280 mV
Density
8.9 g/cm3 560 lb/ft3
Embodied Carbon
3.4 kg CO2/kg material
Embodied Energy
51 MJ/kg 22 x 103 BTU/lb
Embodied Water
300 L/kg 36 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
6.5 to 160 MJ/m3
Resilience: Unit (Modulus of Resilience)
16 to 290 kJ/m3
Stiffness to Weight: Axial
7.7 points
Stiffness to Weight: Bending
19 points
Strength to Weight: Axial
11 points
Strength to Weight: Bending
12 points
Thermal Diffusivity
13 mm2/s
Thermal Shock Resistance
12 points
Alloy Composition
| Cu | 84.7 to 90 | |
| Ni | 9.0 to 11 | |
| Fe | 1.0 to 1.8 | |
| Mn | 0 to 1.0 | |
| Zn | 0 to 1.0 | |
| Pb | 0 to 0.050 | |
| res. | 0 to 0.5 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM B122: Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
Copper: Its Trade, Manufacture, Use, and Environmental Status, Gunter Joseph, 2001
Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook vol. 2, ASM International, 1993