MakeItFrom.com
Menu (ESC)
Home>Nickel AlloyUp Three>Wrought NickelUp Two>N06230 NickelUp One

Cast N06230 Nickel Alloy

Cast N06230 nickel is a type of N06230 nickel. The graph bars on the material properties cards below compare cast N06230 nickel to: wrought nickels (top), all nickel alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Mechanical Properties

Elastic (Young's, Tensile) Modulus

210 GPa 31 x 106 psi

Elongation at Break

38 %

Fatigue Strength

250 MPa 37 x 103 psi

Poisson's Ratio

0.28

Shear Modulus

83 GPa 12 x 106 psi

Shear Strength

420 MPa 61 x 103 psi

Tensile Strength: Ultimate (UTS)

620 MPa 89 x 103 psi

Tensile Strength: Yield (Proof)

330 MPa 47 x 103 psi

Thermal Properties

Latent Heat of Fusion

310 J/g

Maximum Temperature: Mechanical

990 °C 1810 °F

Melting Completion (Liquidus)

1370 °C 2500 °F

Melting Onset (Solidus)

1300 °C 2370 °F

Specific Heat Capacity

420 J/kg-K 0.1 BTU/lb-°F

Thermal Conductivity

8.9 W/m-K 5.2 BTU/h-ft-°F

Thermal Expansion

13 µm/m-K

Electrical Properties

Electrical Conductivity: Equal Volume

1.4 % IACS

Electrical Conductivity: Equal Weight (Specific)

1.3 % IACS

Otherwise Unclassified Properties

Base Metal Price

85 % relative

Density

9.5 g/cm3 590 lb/ft3

Embodied Carbon

11 kg CO2/kg material

Embodied Energy

160 MJ/kg 71 x 103 BTU/lb

Embodied Water

290 L/kg 34 gal/lb

Common Calculations

Resilience: Ultimate (Unit Rupture Work)

200 MJ/m3

Resilience: Unit (Modulus of Resilience)

250 kJ/m3

Stiffness to Weight: Axial

12 points

Stiffness to Weight: Bending

21 points

Strength to Weight: Axial

18 points

Strength to Weight: Bending

17 points

Thermal Diffusivity

2.3 mm2/s

Thermal Shock Resistance

17 points

Alloy Composition

Nickel (Ni)Ni 47.5 to 65.2
Chromium (Cr)Cr 20 to 24
Tungsten (W)W 13 to 15
Cobalt (Co)Co 0 to 5.0
Molybdenum (Mo)Mo 1.0 to 3.0
Iron (Fe)Fe 0 to 3.0
Manganese (Mn)Mn 0.3 to 1.0
Silicon (Si)Si 0.25 to 0.75
Aluminum (Al)Al 0.2 to 0.5
Carbon (C)C 0.050 to 0.15
Lanthanum (La)La 0.0050 to 0.050
Phosphorus (P)P 0 to 0.030
Sulfur (S)S 0 to 0.015
Boron (B)B 0 to 0.015

All values are % weight. Ranges represent what is permitted under applicable standards.

Followup Questions

How are the material properties defined?How do I compare this exact variant to another material?

Further Reading

ASTM B626: Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

ASTM B622: Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

Welding Metallurgy and Weldability of Nickel-Base Alloys, John C. Lippold et al., 2009

Engineering Properties of Nickel and Nickel Alloys, John L. Everhart, 1971

Nickel Alloys, Ulrich Heubner (editor), 1998