Conditioned 30% Glass Fiber (30 GF) PA 4/6
Conditioned 30 GF PA 4/6 is a grade of PA 4/6. It has the lowest strength compared to the other variants of PA 4/6. The graph bars on the material properties cards below compare conditioned 30 GF PA 4/6 to: polyamide plastics (top), all thermoplastics (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
6.0 GPa 0.87 x 106 psi
Elongation at Break
7.0 %
Flexural Modulus
5.5 GPa 0.8 x 106 psi
Flexural Strength
180 MPa 26 x 103 psi
Tensile Strength: Ultimate (UTS)
120 MPa 17 x 103 psi
Electrical Properties
Dielectric Constant (Relative Permittivity) At 1 Hz
16
Dielectric Constant (Relative Permittivity) At 1 MHz
4.7
Dielectric Strength (Breakdown Potential)
20 kV/mm 0.78 V/mil
Electrical Resistivity Order of Magnitude
7.0 10x Ω-m
Other Material Properties
Melting Onset (Solidus)
300 °C 560 °F
Followup Questions
Further Reading
Reinforced Plastics Durability, Geoffrey Pritchard (editor), 1999
SPI Plastics Engineering Handbook of the Society of the Plastics Industry, Inc., 5th ed., Michael L. Berins (editor), 2000
Modern Plastics Handbook, Charles A. Harper (editor), 1999
Plastics Materials, 7th ed., J. A. Brydson, 1999