EN 1.7225 (42CrMo4) Chromium-Molybdenum Steel
EN 1.7225 steel is an alloy steel formulated for primary forming into wrought products. 1.7225 is the EN numeric designation for this material. 42CrMo4 is the EN chemical designation.
The properties of EN 1.7225 steel include six common variations. This page shows summary ranges across all of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare EN 1.7225 steel to: EN wrought alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Brinell Hardness
160 to 300
Elastic (Young's, Tensile) Modulus
190 GPa 27 x 106 psi
Poisson's Ratio
0.29
Shear Modulus
73 GPa 11 x 106 psi
Tensile Strength: Ultimate (UTS)
540 to 1850 MPa 79 to 270 x 103 psi
Thermal Properties
Latent Heat of Fusion
250 J/g
Maximum Temperature: Mechanical
420 °C 800 °F
Melting Completion (Liquidus)
1460 °C 2660 °F
Melting Onset (Solidus)
1420 °C 2580 °F
Specific Heat Capacity
470 J/kg-K 0.11 BTU/lb-°F
Thermal Conductivity
46 W/m-K 27 BTU/h-ft-°F
Thermal Expansion
13 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
7.3 % IACS
Electrical Conductivity: Equal Weight (Specific)
8.4 % IACS
Otherwise Unclassified Properties
Base Metal Price
2.5 % relative
Density
7.8 g/cm3 490 lb/ft3
Embodied Carbon
1.5 kg CO2/kg material
Embodied Energy
20 MJ/kg 8.6 x 103 BTU/lb
Embodied Water
51 L/kg 6.1 gal/lb
Common Calculations
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
24 points
Strength to Weight: Axial
19 to 65 points
Strength to Weight: Bending
19 to 43 points
Thermal Diffusivity
12 mm2/s
Thermal Shock Resistance
16 to 54 points
Alloy Composition
Among alloy steels, the composition of EN 1.7225 steel is notable for including copper (Cu) and containing a comparatively high amount of chromium (Cr). Copper is used to improve corrosion resistance, and to add at least some degree of precipitation hardenability. Chromium is used to improve corrosion resistance and most mechanical properties (particularly at higher temperatures).
| Fe | 96.6 to 98 | |
| Cr | 0.9 to 1.2 | |
| Mn | 0.6 to 0.9 | |
| C | 0.38 to 0.45 | |
| Mo | 0.15 to 0.3 | |
| Si | 0 to 0.4 | |
| Cu | 0 to 0.25 | |
| P | 0 to 0.035 | |
| S | 0 to 0.035 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Similar Alloys
Further Reading
EN 10297-1: Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10250-3: Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
EN 10269: Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10263-4: Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering
Manufacture and Uses of Alloy Steels, Henry D. Hibbard, 2005
Ferrous Materials: Steel and Cast Iron, Hans Berns and Werner Theisen, 2008
Steels: Processing, Structure, and Performance, 2nd ed., George Krauss, 2015