EN 1.8834 (S355ML) Steel
EN 1.8834 steel is an alloy steel formulated for primary forming into wrought products. Cited properties are appropriate for the thermomechanically rolled condition. 1.8834 is the EN numeric designation for this material. S355ML is the EN chemical designation.
It has a moderately high thermal conductivity and a very low tensile strength among EN wrought alloy steels.
The graph bars on the material properties cards below compare EN 1.8834 steel to: EN wrought alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Brinell Hardness
160
Elastic (Young's, Tensile) Modulus
190 GPa 27 x 106 psi
Elongation at Break
25 %
Fatigue Strength
260 MPa 38 x 103 psi
Impact Strength: V-Notched Charpy
49 J 36 ft-lb
Poisson's Ratio
0.29
Shear Modulus
73 GPa 11 x 106 psi
Shear Strength
340 MPa 49 x 103 psi
Tensile Strength: Ultimate (UTS)
530 MPa 77 x 103 psi
Tensile Strength: Yield (Proof)
360 MPa 52 x 103 psi
Thermal Properties
Latent Heat of Fusion
250 J/g
Maximum Temperature: Mechanical
410 °C 760 °F
Melting Completion (Liquidus)
1460 °C 2660 °F
Melting Onset (Solidus)
1420 °C 2590 °F
Specific Heat Capacity
470 J/kg-K 0.11 BTU/lb-°F
Thermal Conductivity
47 W/m-K 27 BTU/h-ft-°F
Thermal Expansion
13 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
7.5 % IACS
Electrical Conductivity: Equal Weight (Specific)
8.6 % IACS
Otherwise Unclassified Properties
Base Metal Price
2.4 % relative
Density
7.8 g/cm3 490 lb/ft3
Embodied Carbon
1.6 kg CO2/kg material
Embodied Energy
22 MJ/kg 9.5 x 103 BTU/lb
Embodied Water
49 L/kg 5.9 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
120 MJ/m3
Resilience: Unit (Modulus of Resilience)
340 kJ/m3
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
24 points
Strength to Weight: Axial
19 points
Strength to Weight: Bending
19 points
Thermal Diffusivity
13 mm2/s
Thermal Shock Resistance
16 points
Alloy Composition
Among alloy steels, the composition of EN 1.8834 steel is notable for including niobium (Nb) and titanium (Ti). Niobium is primarily used to improve yield strength. Titanium is used to broadly improve mechanical properties.
| Fe | 95.6 to 99.985 | |
| Mn | 0 to 1.7 | |
| Cu | 0 to 0.6 | |
| Si | 0 to 0.55 | |
| Ni | 0 to 0.55 | |
| Cr | 0 to 0.35 | |
| C | 0 to 0.16 | |
| Mo | 0 to 0.13 | |
| V | 0 to 0.12 | |
| Nb | 0 to 0.060 | |
| Ti | 0 to 0.060 | |
| Al | 0.015 to 0.034 | |
| P | 0 to 0.030 | |
| S | 0 to 0.025 | |
| N | 0 to 0.017 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Similar Alloys
Further Reading
EN 10025-4: Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
Welding Metallurgy, 2nd ed., Sindo Kou, 2003
ASM Specialty Handbook: Carbon and Alloy Steels, J. R. Davis (editor), 1996
Manufacture and Uses of Alloy Steels, Henry D. Hibbard, 2005
Ferrous Materials: Steel and Cast Iron, Hans Berns and Werner Theisen, 2008
Steels: Processing, Structure, and Performance, 2nd ed., George Krauss, 2015