Grade 13 (R53413) Titanium
Grade 13 titanium is a titanium alloy formulated for primary forming into wrought products. Cited properties are appropriate for the annealed condition. R53413 is the UNS number for this material. Additionally, the ASTM designation is Titanium Grade 13.
It has a moderately high thermal conductivity among wrought titaniums. In addition, it has a fairly high ductility and a fairly low tensile strength.
The graph bars on the material properties cards below compare grade 13 titanium to: wrought titaniums (top), all titanium alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
110 GPa 16 x 106 psi
Elongation at Break
27 %
Fatigue Strength
140 MPa 21 x 103 psi
Poisson's Ratio
0.32
Reduction in Area
34 %
Shear Modulus
41 GPa 5.9 x 106 psi
Shear Strength
200 MPa 29 x 103 psi
Tensile Strength: Ultimate (UTS)
310 MPa 45 x 103 psi
Tensile Strength: Yield (Proof)
190 MPa 28 x 103 psi
Thermal Properties
Latent Heat of Fusion
420 J/g
Maximum Temperature: Mechanical
320 °C 600 °F
Melting Completion (Liquidus)
1660 °C 3020 °F
Melting Onset (Solidus)
1610 °C 2930 °F
Specific Heat Capacity
540 J/kg-K 0.13 BTU/lb-°F
Thermal Conductivity
22 W/m-K 13 BTU/h-ft-°F
Thermal Expansion
8.7 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
3.6 % IACS
Electrical Conductivity: Equal Weight (Specific)
7.2 % IACS
Otherwise Unclassified Properties
Base Metal Price
37 % relative
Density
4.5 g/cm3 280 lb/ft3
Embodied Carbon
32 kg CO2/kg material
Embodied Energy
520 MJ/kg 220 x 103 BTU/lb
Embodied Water
210 L/kg 25 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
73 MJ/m3
Resilience: Unit (Modulus of Resilience)
180 kJ/m3
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
35 points
Strength to Weight: Axial
19 points
Strength to Weight: Bending
22 points
Thermal Diffusivity
8.9 mm2/s
Thermal Shock Resistance
24 points
Alloy Composition
| Ti | 98.5 to 99.56 | |
| Ni | 0.4 to 0.6 | |
| Fe | 0 to 0.2 | |
| O | 0 to 0.1 | |
| Ru | 0.040 to 0.060 | |
| C | 0 to 0.080 | |
| N | 0 to 0.030 | |
| H | 0 to 0.015 | |
| res. | 0 to 0.4 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Similar Alloys
Further Reading
ASTM B861: Standard Specification for Titanium and Titanium Alloy Seamless Pipe
ASTM B381: Standard Specification for Titanium and Titanium Alloy Forgings
ASTM B265: Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
ASTM B348: Standard Specification for Titanium and Titanium Alloy Bars and Billets
Titanium and Titanium Alloys: Fundamentals and Applications, Christoph Leyens and Manfred Peters (editors), 2003
Titanium, 2nd ed., G. Lutjering and J. C. Williams, 2007
Aerospace Materials, Brian Cantor et al. (editors), 2001