Grade 702C Cast Zirconium
Grade 702C zirconium is a zirconium alloy. Cited properties are appropriate for the as-fabricated (no temper or treatment) condition. It has a moderately low ductility among the zirconium alloys in the database.
The graph bars on the material properties cards below compare grade 702C zirconium to: zirconium alloys (top), all alloys in the same category (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Brinell Hardness
180
Elastic (Young's, Tensile) Modulus
97 GPa 14 x 106 psi
Elongation at Break
13 %
Poisson's Ratio
0.34
Rockwell B Hardness
84
Shear Modulus
36 GPa 5.3 x 106 psi
Tensile Strength: Ultimate (UTS)
430 MPa 62 x 103 psi
Tensile Strength: Yield (Proof)
310 MPa 46 x 103 psi
Thermal Properties
Latent Heat of Fusion
250 J/g
Specific Heat Capacity
270 J/kg-K 0.064 BTU/lb-°F
Thermal Conductivity
22 W/m-K 13 BTU/h-ft-°F
Thermal Expansion
5.7 µm/m-K
Otherwise Unclassified Properties
Density
6.7 g/cm3 420 lb/ft3
Embodied Water
450 L/kg 54 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
52 MJ/m3
Resilience: Unit (Modulus of Resilience)
510 kJ/m3
Stiffness to Weight: Axial
8.1 points
Stiffness to Weight: Bending
23 points
Strength to Weight: Axial
18 points
Strength to Weight: Bending
19 points
Thermal Diffusivity
12 mm2/s
Thermal Shock Resistance
55 points
Alloy Composition
| Zr | 94.8 to 100 | |
| Hf | 0 to 4.5 | |
| Fe | 0 to 0.3 | |
| O | 0 to 0.25 | |
| C | 0 to 0.1 | |
| N | 0 to 0.030 | |
| P | 0 to 0.010 | |
| H | 0 to 0.0050 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Similar Alloys
Further Reading
ASTM B752: Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application