Half-Hard (H02) C10500 Copper
H02 C10500 copper is C10500 copper in the H02 (half hard) temper. The graph bars on the material properties cards below compare H02 C10500 copper to: wrought coppers (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
120 GPa 17 x 106 psi
Elongation at Break
14 %
Poisson's Ratio
0.34
Rockwell B Hardness
40
Rockwell F Hardness
84
Rockwell Superficial 30T Hardness
50
Shear Modulus
43 GPa 6.3 x 106 psi
Shear Strength
180 MPa 26 x 103 psi
Tensile Strength: Ultimate (UTS)
290 MPa 42 x 103 psi
Tensile Strength: Yield (Proof)
270 MPa 39 x 103 psi
Thermal Properties
Latent Heat of Fusion
210 J/g
Maximum Temperature: Mechanical
200 °C 390 °F
Melting Completion (Liquidus)
1080 °C 1980 °F
Melting Onset (Solidus)
1080 °C 1980 °F
Specific Heat Capacity
390 J/kg-K 0.092 BTU/lb-°F
Thermal Conductivity
390 W/m-K 220 BTU/h-ft-°F
Thermal Expansion
17 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
100 % IACS
Electrical Conductivity: Equal Weight (Specific)
100 % IACS
Otherwise Unclassified Properties
Base Metal Price
32 % relative
Density
9.0 g/cm3 560 lb/ft3
Embodied Carbon
2.6 kg CO2/kg material
Embodied Energy
42 MJ/kg 18 x 103 BTU/lb
Embodied Water
350 L/kg 41 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
39 MJ/m3
Resilience: Unit (Modulus of Resilience)
310 kJ/m3
Stiffness to Weight: Axial
7.2 points
Stiffness to Weight: Bending
18 points
Strength to Weight: Axial
8.9 points
Strength to Weight: Bending
11 points
Thermal Diffusivity
110 mm2/s
Thermal Shock Resistance
10 points
Alloy Composition
| Cu | 99.89 to 99.966 | |
| Ag | 0.034 to 0.060 | |
| O | 0 to 0.0010 | |
| res. | 0 to 0.050 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM B152: Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar