Hardened M41 Tool Steel
Hardened SAE-AISI M41 is SAE-AISI M41 steel in the hardened (H) condition. The graph bars on the material properties cards below compare hardened SAE-AISI M41 to: tool steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
200 GPa 29 x 106 psi
Poisson's Ratio
0.29
Rockwell C Hardness
71
Shear Modulus
77 GPa 11 x 106 psi
Tensile Strength: Ultimate (UTS)
2290 MPa 330 x 103 psi
Thermal Properties
Latent Heat of Fusion
260 J/g
Melting Completion (Liquidus)
1600 °C 2910 °F
Melting Onset (Solidus)
1550 °C 2830 °F
Specific Heat Capacity
440 J/kg-K 0.11 BTU/lb-°F
Thermal Conductivity
22 W/m-K 13 BTU/h-ft-°F
Thermal Expansion
12 µm/m-K
Otherwise Unclassified Properties
Base Metal Price
33 % relative
Density
8.4 g/cm3 530 lb/ft3
Embodied Carbon
9.1 kg CO2/kg material
Embodied Energy
140 MJ/kg 59 x 103 BTU/lb
Embodied Water
120 L/kg 15 gal/lb
Common Calculations
PREN (Pitting Resistance)
28
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
23 points
Strength to Weight: Axial
76 points
Strength to Weight: Bending
46 points
Thermal Diffusivity
6.0 mm2/s
Thermal Shock Resistance
71 points
Alloy Composition
| Fe | 73.4 to 78.9 | |
| W | 6.3 to 7.0 | |
| Co | 4.8 to 5.8 | |
| Cr | 3.8 to 4.5 | |
| Mo | 3.3 to 4.3 | |
| V | 1.8 to 2.3 | |
| C | 1.1 to 1.2 | |
| Mn | 0.2 to 0.6 | |
| Si | 0.15 to 0.5 | |
| Ni | 0 to 0.3 | |
| Cu | 0 to 0.25 | |
| P | 0 to 0.030 | |
| S | 0 to 0.030 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM A600: Standard Specification for Tool Steel High Speed
Tool Steels, 5th ed., George Roberts et al., 1998
Tool Steels: Properties and Performance, Rafael A. Mesquita (editor), 2016
ASM Specialty Handbook: Carbon and Alloy Steels, J. R. Davis (editor), 1996
CRC Materials Science and Engineering Handbook, 4th ed., James F. Shackelford et al. (editors), 2015