Hot Rolled 1.4062 Stainless Steel
Hot rolled EN 1.4062 is EN 1.4062 stainless steel in the hot worked condition. The graph bars on the material properties cards below compare hot rolled EN 1.4062 to: wrought duplex stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
200 GPa 29 x 106 psi
Elongation at Break
34 %
Fatigue Strength
420 MPa 61 x 103 psi
Impact Strength: V-Notched Charpy
90 J 67 ft-lb
Poisson's Ratio
0.27
Shear Modulus
79 GPa 11 x 106 psi
Shear Strength
510 MPa 74 x 103 psi
Tensile Strength: Ultimate (UTS)
770 MPa 110 x 103 psi
Tensile Strength: Yield (Proof)
530 MPa 76 x 103 psi
Thermal Properties
Latent Heat of Fusion
290 J/g
Maximum Temperature: Corrosion
440 °C 820 °F
Maximum Temperature: Mechanical
1030 °C 1890 °F
Melting Completion (Liquidus)
1430 °C 2600 °F
Melting Onset (Solidus)
1380 °C 2520 °F
Specific Heat Capacity
480 J/kg-K 0.12 BTU/lb-°F
Thermal Conductivity
15 W/m-K 8.7 BTU/h-ft-°F
Thermal Expansion
13 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
2.1 % IACS
Electrical Conductivity: Equal Weight (Specific)
2.4 % IACS
Otherwise Unclassified Properties
Base Metal Price
12 % relative
Density
7.7 g/cm3 480 lb/ft3
Embodied Carbon
2.6 kg CO2/kg material
Embodied Energy
37 MJ/kg 16 x 103 BTU/lb
Embodied Water
150 L/kg 18 gal/lb
Common Calculations
PREN (Pitting Resistance)
27
Resilience: Ultimate (Unit Rupture Work)
230 MJ/m3
Resilience: Unit (Modulus of Resilience)
690 kJ/m3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
25 points
Strength to Weight: Axial
28 points
Strength to Weight: Bending
24 points
Thermal Diffusivity
4.0 mm2/s
Thermal Shock Resistance
21 points
Alloy Composition
| Fe | 69.3 to 77.3 | |
| Cr | 21.5 to 24 | |
| Ni | 1.0 to 2.9 | |
| Mn | 0 to 2.0 | |
| Si | 0 to 1.0 | |
| Mo | 0 to 0.45 | |
| N | 0.16 to 0.28 | |
| P | 0 to 0.040 | |
| C | 0 to 0.030 | |
| S | 0 to 0.010 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
Duplex Stainless Steels, Iris Alvarez-Armas and Suzanne Degallaix-Moreuil (editors), 2009
Duplex Stainless Steels: Microstructure, Properties and Applications, Robert N. Gunn (editor), 1997
EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-1: Stainless steels - Part 1: List of stainless steels
Properties and Selection: Irons, Steels and High Performance Alloys, ASM Handbook vol. 1, ASM International, 1993
Corrosion of Stainless Steels, A. John Sedriks, 1996
Advances in Stainless Steels, Baldev Raj et al. (editors), 2010