Normalized and Tempered (+NT) 1.7386 Steel
EN 1.7386 +NT steel is EN 1.7386 steel in the normalized and tempered condition. The graph bars on the material properties cards below compare EN 1.7386 +NT steel to: EN wrought alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Brinell Hardness
200
Elastic (Young's, Tensile) Modulus
190 GPa 28 x 106 psi
Elongation at Break
18 %
Fatigue Strength
290 MPa 43 x 103 psi
Impact Strength: V-Notched Charpy
38 J 28 ft-lb
Poisson's Ratio
0.28
Shear Modulus
75 GPa 11 x 106 psi
Shear Strength
410 MPa 60 x 103 psi
Tensile Strength: Ultimate (UTS)
670 MPa 96 x 103 psi
Tensile Strength: Yield (Proof)
440 MPa 63 x 103 psi
Thermal Properties
Latent Heat of Fusion
270 J/g
Maximum Temperature: Mechanical
600 °C 1110 °F
Melting Completion (Liquidus)
1450 °C 2650 °F
Melting Onset (Solidus)
1410 °C 2570 °F
Specific Heat Capacity
480 J/kg-K 0.11 BTU/lb-°F
Thermal Conductivity
26 W/m-K 15 BTU/h-ft-°F
Thermal Expansion
13 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
9.0 % IACS
Electrical Conductivity: Equal Weight (Specific)
10 % IACS
Otherwise Unclassified Properties
Base Metal Price
6.5 % relative
Density
7.8 g/cm3 490 lb/ft3
Embodied Carbon
2.0 kg CO2/kg material
Embodied Energy
28 MJ/kg 12 x 103 BTU/lb
Embodied Water
88 L/kg 10 gal/lb
Common Calculations
PREN (Pitting Resistance)
12
Resilience: Ultimate (Unit Rupture Work)
110 MJ/m3
Resilience: Unit (Modulus of Resilience)
490 kJ/m3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
25 points
Strength to Weight: Axial
24 points
Strength to Weight: Bending
22 points
Thermal Diffusivity
6.9 mm2/s
Thermal Shock Resistance
18 points
Alloy Composition
Fe | 86.8 to 90.5 | |
Cr | 8.0 to 10 | |
Mo | 0.9 to 1.1 | |
Si | 0.25 to 1.0 | |
Mn | 0.3 to 0.6 | |
Cu | 0 to 0.3 | |
C | 0.080 to 0.15 | |
Al | 0 to 0.040 | |
P | 0 to 0.025 | |
S | 0 to 0.010 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
EN 10216-2: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Creep-Resistant Steels, Fujio Abe et al. (editors), 2008
Pressure Vessels: External Pressure Technology, 2nd ed., Carl T. F. Ross, 2011
Manufacture and Uses of Alloy Steels, Henry D. Hibbard, 2005
Ferrous Materials: Steel and Cast Iron, Hans Berns and Werner Theisen, 2008
CRC Materials Science and Engineering Handbook, 4th ed., James F. Shackelford et al. (editors), 2015
Steels: Processing, Structure, and Performance, 2nd ed., George Krauss, 2015