Quarter-Hard (H01) C15100 Copper
H01 C15100 copper is C15100 copper in the H01 (quarter hard) temper. It has the second lowest strength and second highest ductility compared to the other variants of C15100 copper. The graph bars on the material properties cards below compare H01 C15100 copper to: wrought coppers (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
120 GPa 17 x 106 psi
Elongation at Break
13 %
Poisson's Ratio
0.34
Rockwell B Hardness
30
Rockwell F Hardness
81
Rockwell Superficial 30T Hardness
48
Shear Modulus
43 GPa 6.3 x 106 psi
Shear Strength
170 MPa 25 x 103 psi
Tensile Strength: Ultimate (UTS)
290 MPa 42 x 103 psi
Tensile Strength: Yield (Proof)
260 MPa 37 x 103 psi
Thermal Properties
Latent Heat of Fusion
210 J/g
Maximum Temperature: Mechanical
200 °C 390 °F
Melting Completion (Liquidus)
1100 °C 2010 °F
Melting Onset (Solidus)
1030 °C 1890 °F
Specific Heat Capacity
390 J/kg-K 0.092 BTU/lb-°F
Thermal Conductivity
360 W/m-K 210 BTU/h-ft-°F
Thermal Expansion
17 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
95 % IACS
Electrical Conductivity: Equal Weight (Specific)
95 % IACS
Otherwise Unclassified Properties
Base Metal Price
31 % relative
Density
9.0 g/cm3 560 lb/ft3
Embodied Carbon
2.7 kg CO2/kg material
Embodied Energy
43 MJ/kg 18 x 103 BTU/lb
Embodied Water
310 L/kg 37 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
36 MJ/m3
Resilience: Unit (Modulus of Resilience)
280 kJ/m3
Stiffness to Weight: Axial
7.2 points
Stiffness to Weight: Bending
18 points
Strength to Weight: Axial
9.0 points
Strength to Weight: Bending
11 points
Thermal Diffusivity
100 mm2/s
Thermal Shock Resistance
10 points
Alloy Composition
| Cu | 99.8 to 99.95 | |
| Zr | 0.050 to 0.15 | |
| res. | 0 to 0.1 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
Copper Alloys: Preparation, Properties and Applications, Michael Naboka and Jennifer Giordano (editors), 2013