Quarter-Hard (H01) C42600 Brass
H01 C42600 brass is C42600 brass in the H01 (quarter hard) temper. It has the second lowest strength and second highest ductility compared to the other variants of C42600 brass. The graph bars on the material properties cards below compare H01 C42600 brass to: wrought brasses (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
110 GPa 16 x 106 psi
Elongation at Break
23 %
Poisson's Ratio
0.33
Shear Modulus
42 GPa 6.1 x 106 psi
Shear Strength
300 MPa 43 x 103 psi
Tensile Strength: Ultimate (UTS)
470 MPa 68 x 103 psi
Tensile Strength: Yield (Proof)
310 MPa 45 x 103 psi
Thermal Properties
Latent Heat of Fusion
200 J/g
Maximum Temperature: Mechanical
180 °C 350 °F
Melting Completion (Liquidus)
1030 °C 1890 °F
Melting Onset (Solidus)
1010 °C 1850 °F
Specific Heat Capacity
380 J/kg-K 0.091 BTU/lb-°F
Thermal Conductivity
110 W/m-K 63 BTU/h-ft-°F
Thermal Expansion
18 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
25 % IACS
Electrical Conductivity: Equal Weight (Specific)
26 % IACS
Otherwise Unclassified Properties
Base Metal Price
31 % relative
Density
8.7 g/cm3 540 lb/ft3
Embodied Carbon
2.9 kg CO2/kg material
Embodied Energy
48 MJ/kg 20 x 103 BTU/lb
Embodied Water
340 L/kg 40 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
95 MJ/m3
Resilience: Unit (Modulus of Resilience)
430 kJ/m3
Stiffness to Weight: Axial
7.1 points
Stiffness to Weight: Bending
18 points
Strength to Weight: Axial
15 points
Strength to Weight: Bending
15 points
Thermal Diffusivity
33 mm2/s
Thermal Shock Resistance
17 points
Alloy Composition
| Cu | 87 to 90 | |
| Zn | 5.3 to 10.4 | |
| Sn | 2.5 to 4.0 | |
| Ni | 0.050 to 0.2 | |
| Fe | 0.050 to 0.2 | |
| P | 0.020 to 0.050 | |
| Pb | 0 to 0.050 | |
| res. | 0 to 0.2 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook vol. 2, ASM International, 1993