Quarter-Hard (H01) C63800 Bronze
H01 C63800 bronze is C63800 bronze in the H01 (quarter hard) temper. The graph bars on the material properties cards below compare H01 C63800 bronze to: wrought bronzes (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
110 GPa 17 x 106 psi
Elongation at Break
29 %
Poisson's Ratio
0.34
Rockwell B Hardness
94
Rockwell Superficial 30T Hardness
78
Shear Modulus
43 GPa 6.2 x 106 psi
Shear Strength
430 MPa 63 x 103 psi
Tensile Strength: Ultimate (UTS)
660 MPa 96 x 103 psi
Tensile Strength: Yield (Proof)
280 MPa 41 x 103 psi
Thermal Properties
Latent Heat of Fusion
240 J/g
Maximum Temperature: Mechanical
200 °C 400 °F
Melting Completion (Liquidus)
1030 °C 1880 °F
Melting Onset (Solidus)
1000 °C 1830 °F
Specific Heat Capacity
410 J/kg-K 0.1 BTU/lb-°F
Thermal Conductivity
40 W/m-K 23 BTU/h-ft-°F
Thermal Expansion
17 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
10 % IACS
Electrical Conductivity: Equal Weight (Specific)
10 % IACS
Otherwise Unclassified Properties
Base Metal Price
30 % relative
Density
8.6 g/cm3 540 lb/ft3
Embodied Carbon
2.8 kg CO2/kg material
Embodied Energy
45 MJ/kg 19 x 103 BTU/lb
Embodied Water
330 L/kg 39 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
160 MJ/m3
Resilience: Unit (Modulus of Resilience)
350 kJ/m3
Stiffness to Weight: Axial
7.4 points
Stiffness to Weight: Bending
19 points
Strength to Weight: Axial
21 points
Strength to Weight: Bending
20 points
Thermal Diffusivity
11 mm2/s
Thermal Shock Resistance
24 points
Alloy Composition
| Cu | 92.4 to 95.8 | |
| Al | 2.5 to 3.1 | |
| Si | 1.5 to 2.1 | |
| Co | 0.25 to 0.55 | |
| Zn | 0 to 0.8 | |
| Ni | 0 to 0.2 | |
| Fe | 0 to 0.2 | |
| Mn | 0 to 0.1 | |
| Pb | 0 to 0.050 | |
| res. | 0 to 0.5 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM B422: Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper- Nickel-Tin Alloy Sheet and Strip
ASM Specialty Handbook: Copper and Copper Alloys, J. R. Davis (editor), 2001
CRC Materials Science and Engineering Handbook, 4th ed., James F. Shackelford et al. (editors), 2015