Quench Hardened and Temper Annealed (TQ50) C63200 Bronze
TQ50 C63200 bronze is C63200 bronze in the TQ50 (quench hardened and temper annealed) condition. The graph bars on the material properties cards below compare TQ50 C63200 bronze to: wrought bronzes (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
120 GPa 17 x 106 psi
Elongation at Break
18 %
Poisson's Ratio
0.34
Rockwell B Hardness
88
Shear Modulus
44 GPa 6.4 x 106 psi
Shear Strength
410 MPa 60 x 103 psi
Tensile Strength: Ultimate (UTS)
670 MPa 97 x 103 psi
Tensile Strength: Yield (Proof)
350 MPa 51 x 103 psi
Thermal Properties
Latent Heat of Fusion
230 J/g
Maximum Temperature: Mechanical
230 °C 450 °F
Melting Completion (Liquidus)
1060 °C 1940 °F
Melting Onset (Solidus)
1040 °C 1910 °F
Specific Heat Capacity
440 J/kg-K 0.11 BTU/lb-°F
Thermal Conductivity
35 W/m-K 20 BTU/h-ft-°F
Thermal Expansion
18 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
7.0 % IACS
Electrical Conductivity: Equal Weight (Specific)
7.6 % IACS
Otherwise Unclassified Properties
Base Metal Price
29 % relative
Density
8.3 g/cm3 520 lb/ft3
Embodied Carbon
3.4 kg CO2/kg material
Embodied Energy
55 MJ/kg 24 x 103 BTU/lb
Embodied Water
380 L/kg 45 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
99 MJ/m3
Resilience: Unit (Modulus of Resilience)
510 kJ/m3
Stiffness to Weight: Axial
7.9 points
Stiffness to Weight: Bending
20 points
Strength to Weight: Axial
22 points
Strength to Weight: Bending
21 points
Thermal Diffusivity
9.6 mm2/s
Thermal Shock Resistance
23 points
Alloy Composition
| Cu | 78.8 to 82.6 | |
| Al | 8.7 to 9.5 | |
| Ni | 4.0 to 4.8 | |
| Fe | 3.5 to 4.3 | |
| Mn | 1.2 to 2.0 | |
| Si | 0 to 0.1 | |
| Pb | 0 to 0.020 | |
| res. | 0 to 0.5 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM B150: Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
ASTM B283: Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
ASTM B124: Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
Copper: Its Trade, Manufacture, Use, and Environmental Status, Gunter Joseph, 2001
ASM Specialty Handbook: Copper and Copper Alloys, J. R. Davis (editor), 2001
CRC Materials Science and Engineering Handbook, 4th ed., James F. Shackelford et al. (editors), 2015