Spheroidized and Cold Drawn (+AC+C) 1.0213 Steel
EN 1.0213 +AC+C steel is EN 1.0213 steel in the spheroidized and cold-drawn condition. It has the lowest ductility compared to the other variants of EN 1.0213 steel. The graph bars on the material properties cards below compare EN 1.0213 +AC+C steel to: wrought carbon or non-alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Brinell Hardness
120
Elastic (Young's, Tensile) Modulus
190 GPa 27 x 106 psi
Elongation at Break
12 %
Fatigue Strength
180 MPa 27 x 103 psi
Poisson's Ratio
0.29
Reduction in Area
74 %
Shear Modulus
73 GPa 11 x 106 psi
Shear Strength
240 MPa 34 x 103 psi
Tensile Strength: Ultimate (UTS)
400 MPa 57 x 103 psi
Tensile Strength: Yield (Proof)
300 MPa 43 x 103 psi
Thermal Properties
Latent Heat of Fusion
250 J/g
Maximum Temperature: Mechanical
400 °C 750 °F
Melting Completion (Liquidus)
1470 °C 2670 °F
Melting Onset (Solidus)
1430 °C 2600 °F
Specific Heat Capacity
470 J/kg-K 0.11 BTU/lb-°F
Thermal Conductivity
53 W/m-K 31 BTU/h-ft-°F
Thermal Expansion
12 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
6.9 % IACS
Electrical Conductivity: Equal Weight (Specific)
7.9 % IACS
Otherwise Unclassified Properties
Base Metal Price
1.8 % relative
Density
7.9 g/cm3 490 lb/ft3
Embodied Carbon
1.4 kg CO2/kg material
Embodied Energy
18 MJ/kg 7.8 x 103 BTU/lb
Embodied Water
46 L/kg 5.5 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
42 MJ/m3
Resilience: Unit (Modulus of Resilience)
230 kJ/m3
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
24 points
Strength to Weight: Axial
14 points
Strength to Weight: Bending
15 points
Thermal Diffusivity
14 mm2/s
Thermal Shock Resistance
13 points
Alloy Composition
Fe | 99.245 to 99.67 | |
Mn | 0.25 to 0.45 | |
C | 0.060 to 0.1 | |
Si | 0 to 0.1 | |
Al | 0.020 to 0.060 | |
S | 0 to 0.025 | |
P | 0 to 0.020 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
EN 10263-2: Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
Carbon Steel Handbook, D. Gandy, 2007
ASM Specialty Handbook: Carbon and Alloy Steels, J. R. Davis (editor), 1996
Ferrous Materials: Steel and Cast Iron, Hans Berns and Werner Theisen, 2008
Steels: Processing, Structure, and Performance, 2nd ed., George Krauss, 2015