MakeItFrom.com
Menu (ESC)

201.0 Aluminum vs. EN 1.4826 Stainless Steel

201.0 aluminum belongs to the aluminum alloys classification, while EN 1.4826 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 201.0 aluminum and the bottom bar is EN 1.4826 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 95 to 140
150
Elastic (Young's, Tensile) Modulus, GPa 71
200
Elongation at Break, % 4.4 to 20
9.1
Fatigue Strength, MPa 120 to 150
140
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
77
Tensile Strength: Ultimate (UTS), MPa 370 to 470
500
Tensile Strength: Yield (Proof), MPa 220 to 400
260

Thermal Properties

Latent Heat of Fusion, J/g 390
310
Maximum Temperature: Mechanical, °C 170
950
Melting Completion (Liquidus), °C 650
1400
Melting Onset (Solidus), °C 570
1360
Specific Heat Capacity, J/kg-K 870
490
Thermal Conductivity, W/m-K 120
14
Thermal Expansion, µm/m-K 19
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 30 to 33
2.0
Electrical Conductivity: Equal Weight (Specific), % IACS 87 to 97
2.4

Otherwise Unclassified Properties

Base Metal Price, % relative 38
17
Density, g/cm3 3.1
7.7
Embodied Carbon, kg CO2/kg material 8.7
3.3
Embodied Energy, MJ/kg 160
47

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 19 to 63
39
Resilience: Unit (Modulus of Resilience), kJ/m3 330 to 1160
170
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 45
25
Strength to Weight: Axial, points 33 to 42
18
Strength to Weight: Bending, points 37 to 44
18
Thermal Diffusivity, mm2/s 45
3.7
Thermal Shock Resistance, points 19 to 25
11

Alloy Composition

Aluminum (Al), % 92.1 to 95.1
0
Carbon (C), % 0
0.3 to 0.5
Chromium (Cr), % 0
21 to 23
Copper (Cu), % 4.0 to 5.2
0
Iron (Fe), % 0 to 0.15
60.4 to 68.7
Magnesium (Mg), % 0.15 to 0.55
0
Manganese (Mn), % 0.2 to 0.5
0 to 2.0
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0
9.0 to 11
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.1
1.0 to 2.5
Silver (Ag), % 0.4 to 1.0
0
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0.15 to 0.35
0
Residuals, % 0 to 0.1
0