MakeItFrom.com
Menu (ESC)

2011A Aluminum vs. AWS BAg-2a

2011A aluminum belongs to the aluminum alloys classification, while AWS BAg-2a belongs to the otherwise unclassified metals. There are 17 material properties with values for both materials. Properties with values for just one material (14, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2011A aluminum and the bottom bar is AWS BAg-2a.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
83
Poisson's Ratio 0.33
0.32
Shear Modulus, GPa 26
31
Tensile Strength: Ultimate (UTS), MPa 310 to 410
170

Thermal Properties

Latent Heat of Fusion, J/g 390
130
Melting Completion (Liquidus), °C 660
710
Melting Onset (Solidus), °C 550
610
Specific Heat Capacity, J/kg-K 870
310
Thermal Expansion, µm/m-K 23
23

Otherwise Unclassified Properties

Density, g/cm3 3.1
8.8
Embodied Carbon, kg CO2/kg material 7.9
30
Embodied Energy, MJ/kg 150
470

Common Calculations

Stiffness to Weight: Axial, points 13
5.2
Stiffness to Weight: Bending, points 44
17
Strength to Weight: Axial, points 28 to 37
5.4
Strength to Weight: Bending, points 33 to 40
7.8
Thermal Shock Resistance, points 14 to 18
6.5

Alloy Composition

Aluminum (Al), % 91.5 to 95.1
0
Bismuth (Bi), % 0.2 to 0.6
0
Cadmium (Cd), % 0
19 to 21
Copper (Cu), % 4.5 to 6.0
26 to 28
Iron (Fe), % 0 to 0.5
0
Lead (Pb), % 0.2 to 0.6
0
Silicon (Si), % 0 to 0.4
0
Silver (Ag), % 0
29 to 31
Zinc (Zn), % 0 to 0.3
21 to 25
Residuals, % 0
0 to 0.15