MakeItFrom.com
Menu (ESC)

204.0 Aluminum vs. C82400 Copper

204.0 aluminum belongs to the aluminum alloys classification, while C82400 copper belongs to the copper alloys. There are 27 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 204.0 aluminum and the bottom bar is C82400 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
120
Elongation at Break, % 5.7 to 7.8
1.0 to 20
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 27
45
Tensile Strength: Ultimate (UTS), MPa 230 to 340
500 to 1030
Tensile Strength: Yield (Proof), MPa 180 to 220
260 to 970

Thermal Properties

Latent Heat of Fusion, J/g 390
230
Maximum Temperature: Mechanical, °C 170
270
Melting Completion (Liquidus), °C 650
1000
Melting Onset (Solidus), °C 580
900
Specific Heat Capacity, J/kg-K 880
380
Thermal Conductivity, W/m-K 120
130
Thermal Expansion, µm/m-K 19
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 29 to 34
25
Electrical Conductivity: Equal Weight (Specific), % IACS 87 to 100
26

Otherwise Unclassified Properties

Density, g/cm3 3.0
8.8
Embodied Carbon, kg CO2/kg material 8.0
8.9
Embodied Energy, MJ/kg 150
140
Embodied Water, L/kg 1150
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 12 to 23
10 to 83
Resilience: Unit (Modulus of Resilience), kJ/m3 220 to 350
270 to 3870
Stiffness to Weight: Axial, points 13
7.6
Stiffness to Weight: Bending, points 46
19
Strength to Weight: Axial, points 21 to 31
16 to 33
Strength to Weight: Bending, points 28 to 36
16 to 26
Thermal Diffusivity, mm2/s 46
39
Thermal Shock Resistance, points 12 to 18
17 to 36

Alloy Composition

Aluminum (Al), % 93.4 to 95.5
0 to 0.15
Beryllium (Be), % 0
1.6 to 1.9
Chromium (Cr), % 0
0 to 0.1
Cobalt (Co), % 0
0.2 to 0.65
Copper (Cu), % 4.2 to 5.0
96 to 98.2
Iron (Fe), % 0 to 0.35
0 to 0.2
Lead (Pb), % 0
0 to 0.020
Magnesium (Mg), % 0.15 to 0.35
0
Manganese (Mn), % 0 to 0.1
0
Nickel (Ni), % 0 to 0.050
0 to 0.2
Silicon (Si), % 0 to 0.2
0
Tin (Sn), % 0 to 0.050
0 to 0.1
Titanium (Ti), % 0.15 to 0.3
0 to 0.12
Zinc (Zn), % 0 to 0.1
0 to 0.1
Residuals, % 0
0 to 0.5