MakeItFrom.com
Menu (ESC)

204.0 Aluminum vs. N08330 Stainless Steel

204.0 aluminum belongs to the aluminum alloys classification, while N08330 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 204.0 aluminum and the bottom bar is N08330 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 90 to 120
180
Elastic (Young's, Tensile) Modulus, GPa 71
200
Elongation at Break, % 5.7 to 7.8
34
Fatigue Strength, MPa 63 to 77
190
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
76
Tensile Strength: Ultimate (UTS), MPa 230 to 340
550
Tensile Strength: Yield (Proof), MPa 180 to 220
230

Thermal Properties

Latent Heat of Fusion, J/g 390
310
Maximum Temperature: Mechanical, °C 170
1050
Melting Completion (Liquidus), °C 650
1390
Melting Onset (Solidus), °C 580
1340
Specific Heat Capacity, J/kg-K 880
480
Thermal Conductivity, W/m-K 120
12
Thermal Expansion, µm/m-K 19
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 29 to 34
1.7
Electrical Conductivity: Equal Weight (Specific), % IACS 87 to 100
1.9

Otherwise Unclassified Properties

Base Metal Price, % relative 11
32
Density, g/cm3 3.0
8.0
Embodied Carbon, kg CO2/kg material 8.0
5.4
Embodied Energy, MJ/kg 150
77
Embodied Water, L/kg 1150
190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 12 to 23
150
Resilience: Unit (Modulus of Resilience), kJ/m3 220 to 350
140
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 46
24
Strength to Weight: Axial, points 21 to 31
19
Strength to Weight: Bending, points 28 to 36
18
Thermal Diffusivity, mm2/s 46
3.1
Thermal Shock Resistance, points 12 to 18
13

Alloy Composition

Aluminum (Al), % 93.4 to 95.5
0
Carbon (C), % 0
0 to 0.080
Chromium (Cr), % 0
17 to 20
Copper (Cu), % 4.2 to 5.0
0 to 1.0
Iron (Fe), % 0 to 0.35
38.3 to 48.3
Lead (Pb), % 0
0 to 0.0050
Magnesium (Mg), % 0.15 to 0.35
0
Manganese (Mn), % 0 to 0.1
0 to 2.0
Nickel (Ni), % 0 to 0.050
34 to 37
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.2
0.75 to 1.5
Sulfur (S), % 0
0 to 0.030
Tin (Sn), % 0 to 0.050
0 to 0.025
Titanium (Ti), % 0.15 to 0.3
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0