MakeItFrom.com
Menu (ESC)

206.0 Aluminum vs. SAE-AISI 1132 Steel

206.0 aluminum belongs to the aluminum alloys classification, while SAE-AISI 1132 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 206.0 aluminum and the bottom bar is SAE-AISI 1132 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 95 to 110
190 to 210
Elastic (Young's, Tensile) Modulus, GPa 71
190
Elongation at Break, % 8.4 to 12
14 to 18
Fatigue Strength, MPa 88 to 210
240 to 380
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
73
Shear Strength, MPa 260
400 to 440
Tensile Strength: Ultimate (UTS), MPa 330 to 440
640 to 720
Tensile Strength: Yield (Proof), MPa 190 to 350
350 to 590

Thermal Properties

Latent Heat of Fusion, J/g 390
250
Maximum Temperature: Mechanical, °C 170
400
Melting Completion (Liquidus), °C 650
1460
Melting Onset (Solidus), °C 570
1420
Specific Heat Capacity, J/kg-K 880
470
Thermal Conductivity, W/m-K 120
51
Thermal Expansion, µm/m-K 19
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 33
7.1
Electrical Conductivity: Equal Weight (Specific), % IACS 99
8.2

Otherwise Unclassified Properties

Base Metal Price, % relative 11
1.9
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 8.0
1.4
Embodied Energy, MJ/kg 150
19
Embodied Water, L/kg 1150
48

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 24 to 49
93 to 97
Resilience: Unit (Modulus of Resilience), kJ/m3 270 to 840
330 to 940
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 46
24
Strength to Weight: Axial, points 30 to 40
23 to 25
Strength to Weight: Bending, points 35 to 42
21 to 23
Thermal Diffusivity, mm2/s 46
14
Thermal Shock Resistance, points 17 to 23
19 to 22

Alloy Composition

Aluminum (Al), % 93.3 to 95.3
0
Carbon (C), % 0
0.24 to 0.34
Copper (Cu), % 4.2 to 5.0
0
Iron (Fe), % 0 to 0.15
97.8 to 98.3
Magnesium (Mg), % 0.15 to 0.35
0
Manganese (Mn), % 0.2 to 0.5
1.4 to 1.7
Nickel (Ni), % 0 to 0.050
0
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.1
0
Sulfur (S), % 0
0.080 to 0.13
Tin (Sn), % 0 to 0.050
0
Titanium (Ti), % 0.15 to 0.3
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0