MakeItFrom.com
Menu (ESC)

213.0 Aluminum vs. SAE-AISI M62 Steel

213.0 aluminum belongs to the aluminum alloys classification, while SAE-AISI M62 steel belongs to the iron alloys. There are 19 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 213.0 aluminum and the bottom bar is SAE-AISI M62 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 73
200
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 28
79
Tensile Strength: Ultimate (UTS), MPa 190
830 to 2440

Thermal Properties

Latent Heat of Fusion, J/g 410
260
Melting Completion (Liquidus), °C 670
1650
Melting Onset (Solidus), °C 480
1600
Specific Heat Capacity, J/kg-K 850
430
Thermal Expansion, µm/m-K 23
12

Otherwise Unclassified Properties

Base Metal Price, % relative 11
30
Density, g/cm3 3.2
8.5
Embodied Carbon, kg CO2/kg material 7.7
10
Embodied Energy, MJ/kg 140
150
Embodied Water, L/kg 1090
110

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 44
23
Strength to Weight: Axial, points 16
27 to 80
Strength to Weight: Bending, points 23
23 to 47
Thermal Shock Resistance, points 8.0
24 to 71

Alloy Composition

Aluminum (Al), % 83.5 to 93
0
Carbon (C), % 0
1.3 to 1.4
Chromium (Cr), % 0
3.5 to 4.0
Copper (Cu), % 6.0 to 8.0
0 to 0.25
Iron (Fe), % 0 to 1.2
73.6 to 77.4
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.6
0.15 to 0.4
Molybdenum (Mo), % 0
10 to 11
Nickel (Ni), % 0 to 0.35
0 to 0.3
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 1.0 to 3.0
0.15 to 0.4
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.25
0
Tungsten (W), % 0
5.8 to 6.5
Vanadium (V), % 0
1.8 to 2.1
Zinc (Zn), % 0 to 2.5
0
Residuals, % 0 to 0.5
0