MakeItFrom.com
Menu (ESC)

242.0 Aluminum vs. AWS BAu-2

242.0 aluminum belongs to the aluminum alloys classification, while AWS BAu-2 belongs to the otherwise unclassified metals. There are 15 material properties with values for both materials. Properties with values for just one material (19, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 242.0 aluminum and the bottom bar is AWS BAu-2.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 73
100
Poisson's Ratio 0.33
0.4
Shear Modulus, GPa 27
36
Tensile Strength: Ultimate (UTS), MPa 180 to 290
150

Thermal Properties

Latent Heat of Fusion, J/g 390
92
Melting Completion (Liquidus), °C 640
890
Melting Onset (Solidus), °C 530
890
Specific Heat Capacity, J/kg-K 870
180
Thermal Expansion, µm/m-K 22
15

Otherwise Unclassified Properties

Density, g/cm3 3.1
17

Common Calculations

Stiffness to Weight: Axial, points 13
3.3
Stiffness to Weight: Bending, points 45
9.1
Strength to Weight: Axial, points 16 to 26
2.4
Strength to Weight: Bending, points 23 to 32
3.6
Thermal Shock Resistance, points 8.0 to 13
7.1

Alloy Composition

Aluminum (Al), % 88.4 to 93.6
0
Chromium (Cr), % 0 to 0.25
0
Copper (Cu), % 3.5 to 4.5
19.4 to 20.5
Gold (Au), % 0
79.5 to 80.5
Iron (Fe), % 0 to 1.0
0
Magnesium (Mg), % 1.2 to 1.8
0
Manganese (Mn), % 0 to 0.35
0
Nickel (Ni), % 1.7 to 2.3
0
Silicon (Si), % 0 to 0.7
0
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.35
0
Residuals, % 0
0 to 0.15