MakeItFrom.com
Menu (ESC)

295.0 Aluminum vs. AWS BAu-5

295.0 aluminum belongs to the aluminum alloys classification, while AWS BAu-5 belongs to the otherwise unclassified metals. There are 15 material properties with values for both materials. Properties with values for just one material (18, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 295.0 aluminum and the bottom bar is AWS BAu-5.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
140
Poisson's Ratio 0.33
0.37
Shear Modulus, GPa 27
50
Tensile Strength: Ultimate (UTS), MPa 230 to 280
210

Thermal Properties

Latent Heat of Fusion, J/g 400
180
Melting Completion (Liquidus), °C 640
1170
Melting Onset (Solidus), °C 530
1140
Specific Heat Capacity, J/kg-K 880
280
Thermal Expansion, µm/m-K 23
12

Otherwise Unclassified Properties

Density, g/cm3 3.0
13

Common Calculations

Stiffness to Weight: Axial, points 13
5.8
Stiffness to Weight: Bending, points 46
13
Strength to Weight: Axial, points 21 to 26
4.5
Strength to Weight: Bending, points 27 to 32
6.0
Thermal Shock Resistance, points 9.8 to 12
9.0

Alloy Composition

Aluminum (Al), % 91.4 to 95.3
0
Copper (Cu), % 4.0 to 5.0
0
Gold (Au), % 0
29.5 to 30.5
Iron (Fe), % 0 to 1.0
0
Magnesium (Mg), % 0 to 0.030
0
Manganese (Mn), % 0 to 0.35
0
Nickel (Ni), % 0
35.5 to 36.4
Palladium (Pd), % 0
33.5 to 34.5
Silicon (Si), % 0.7 to 1.5
0
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.35
0
Residuals, % 0
0 to 0.15