MakeItFrom.com
Menu (ESC)

3004 Aluminum vs. EN 1.5522 Steel

3004 aluminum belongs to the aluminum alloys classification, while EN 1.5522 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3004 aluminum and the bottom bar is EN 1.5522 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 45 to 83
140 to 190
Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 1.1 to 19
11 to 21
Fatigue Strength, MPa 55 to 120
210 to 330
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 100 to 180
320 to 380
Tensile Strength: Ultimate (UTS), MPa 170 to 310
450 to 1490
Tensile Strength: Yield (Proof), MPa 68 to 270
300 to 520

Thermal Properties

Latent Heat of Fusion, J/g 400
250
Maximum Temperature: Mechanical, °C 180
400
Melting Completion (Liquidus), °C 650
1460
Melting Onset (Solidus), °C 630
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 160
51
Thermal Expansion, µm/m-K 24
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 42
7.1
Electrical Conductivity: Equal Weight (Specific), % IACS 140
8.1

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
1.9
Density, g/cm3 2.8
7.8
Embodied Carbon, kg CO2/kg material 8.3
1.4
Embodied Energy, MJ/kg 150
19
Embodied Water, L/kg 1180
47

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 3.2 to 27
45 to 250
Resilience: Unit (Modulus of Resilience), kJ/m3 33 to 540
250 to 720
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 18 to 31
16 to 53
Strength to Weight: Bending, points 25 to 37
17 to 37
Thermal Diffusivity, mm2/s 65
14
Thermal Shock Resistance, points 7.6 to 13
13 to 44

Alloy Composition

Aluminum (Al), % 95.6 to 98.2
0
Boron (B), % 0
0.00080 to 0.0050
Carbon (C), % 0
0.2 to 0.24
Copper (Cu), % 0 to 0.25
0 to 0.25
Iron (Fe), % 0 to 0.7
98 to 98.9
Magnesium (Mg), % 0.8 to 1.3
0
Manganese (Mn), % 1.0 to 1.5
0.9 to 1.2
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 0 to 0.3
0 to 0.3
Sulfur (S), % 0
0 to 0.025
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0