MakeItFrom.com
Menu (ESC)

3004 Aluminum vs. EN 2.4879 Cast Nickel

3004 aluminum belongs to the aluminum alloys classification, while EN 2.4879 cast nickel belongs to the nickel alloys. There are 27 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3004 aluminum and the bottom bar is EN 2.4879 cast nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 1.1 to 19
3.4
Fatigue Strength, MPa 55 to 120
110
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
80
Tensile Strength: Ultimate (UTS), MPa 170 to 310
490
Tensile Strength: Yield (Proof), MPa 68 to 270
270

Thermal Properties

Latent Heat of Fusion, J/g 400
330
Maximum Temperature: Mechanical, °C 180
1150
Melting Completion (Liquidus), °C 650
1450
Melting Onset (Solidus), °C 630
1400
Specific Heat Capacity, J/kg-K 900
460
Thermal Conductivity, W/m-K 160
11
Thermal Expansion, µm/m-K 24
13

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
55
Density, g/cm3 2.8
8.5
Embodied Carbon, kg CO2/kg material 8.3
8.3
Embodied Energy, MJ/kg 150
120
Embodied Water, L/kg 1180
270

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 3.2 to 27
14
Resilience: Unit (Modulus of Resilience), kJ/m3 33 to 540
180
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
23
Strength to Weight: Axial, points 18 to 31
16
Strength to Weight: Bending, points 25 to 37
16
Thermal Diffusivity, mm2/s 65
2.8
Thermal Shock Resistance, points 7.6 to 13
13

Alloy Composition

Aluminum (Al), % 95.6 to 98.2
0
Carbon (C), % 0
0.35 to 0.55
Chromium (Cr), % 0
27 to 30
Copper (Cu), % 0 to 0.25
0
Iron (Fe), % 0 to 0.7
9.4 to 20.7
Magnesium (Mg), % 0.8 to 1.3
0
Manganese (Mn), % 1.0 to 1.5
0 to 1.5
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0
47 to 50
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.3
1.0 to 2.0
Sulfur (S), % 0
0 to 0.030
Tungsten (W), % 0
4.0 to 6.0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0