3004 Aluminum vs. Type 3 Niobium
3004 aluminum belongs to the aluminum alloys classification, while Type 3 niobium belongs to the otherwise unclassified metals. There are 21 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 3004 aluminum and the bottom bar is Type 3 niobium.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 45 to 83 | |
110 |
Elastic (Young's, Tensile) Modulus, GPa | 70 | |
100 |
Elongation at Break, % | 1.1 to 19 | |
23 |
Poisson's Ratio | 0.33 | |
0.4 |
Shear Modulus, GPa | 26 | |
38 |
Tensile Strength: Ultimate (UTS), MPa | 170 to 310 | |
220 |
Tensile Strength: Yield (Proof), MPa | 68 to 270 | |
140 |
Thermal Properties
Latent Heat of Fusion, J/g | 400 | |
310 |
Specific Heat Capacity, J/kg-K | 900 | |
270 |
Thermal Conductivity, W/m-K | 160 | |
42 |
Thermal Expansion, µm/m-K | 24 | |
7.3 |
Otherwise Unclassified Properties
Density, g/cm3 | 2.8 | |
8.6 |
Embodied Water, L/kg | 1180 | |
160 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 3.2 to 27 | |
44 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 33 to 540 | |
93 |
Stiffness to Weight: Axial, points | 14 | |
6.8 |
Stiffness to Weight: Bending, points | 50 | |
18 |
Strength to Weight: Axial, points | 18 to 31 | |
7.2 |
Strength to Weight: Bending, points | 25 to 37 | |
9.5 |
Thermal Diffusivity, mm2/s | 65 | |
18 |
Thermal Shock Resistance, points | 7.6 to 13 | |
21 |
Alloy Composition
Aluminum (Al), % | 95.6 to 98.2 | |
0 |
Carbon (C), % | 0 | |
0 to 0.010 |
Copper (Cu), % | 0 to 0.25 | |
0 |
Hafnium (Hf), % | 0 | |
0 to 0.020 |
Hydrogen (H), % | 0 | |
0 to 0.0015 |
Iron (Fe), % | 0 to 0.7 | |
0 to 0.0050 |
Magnesium (Mg), % | 0.8 to 1.3 | |
0 |
Manganese (Mn), % | 1.0 to 1.5 | |
0 |
Molybdenum (Mo), % | 0 | |
0 to 0.010 |
Nickel (Ni), % | 0 | |
0 to 0.0050 |
Niobium (Nb), % | 0 | |
98.6 to 99.2 |
Nitrogen (N), % | 0 | |
0 to 0.010 |
Oxygen (O), % | 0 | |
0 to 0.015 |
Silicon (Si), % | 0 to 0.3 | |
0 to 0.0050 |
Tantalum (Ta), % | 0 | |
0 to 0.1 |
Titanium (Ti), % | 0 | |
0 to 0.020 |
Tungsten (W), % | 0 | |
0 to 0.030 |
Zinc (Zn), % | 0 to 0.25 | |
0 |
Zirconium (Zr), % | 0 | |
0.8 to 1.2 |
Residuals, % | 0 to 0.15 | |
0 |