MakeItFrom.com
Menu (ESC)

3004 Aluminum vs. C33200 Brass

3004 aluminum belongs to the aluminum alloys classification, while C33200 brass belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3004 aluminum and the bottom bar is C33200 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
100
Elongation at Break, % 1.1 to 19
7.0 to 60
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 26
40
Shear Strength, MPa 100 to 180
240 to 300
Tensile Strength: Ultimate (UTS), MPa 170 to 310
320 to 520
Tensile Strength: Yield (Proof), MPa 68 to 270
110 to 450

Thermal Properties

Latent Heat of Fusion, J/g 400
170
Maximum Temperature: Mechanical, °C 180
130
Melting Completion (Liquidus), °C 650
930
Melting Onset (Solidus), °C 630
900
Specific Heat Capacity, J/kg-K 900
380
Thermal Conductivity, W/m-K 160
120
Thermal Expansion, µm/m-K 24
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 42
26
Electrical Conductivity: Equal Weight (Specific), % IACS 140
28

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
24
Density, g/cm3 2.8
8.2
Embodied Carbon, kg CO2/kg material 8.3
2.6
Embodied Energy, MJ/kg 150
44
Embodied Water, L/kg 1180
320

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 3.2 to 27
35 to 150
Resilience: Unit (Modulus of Resilience), kJ/m3 33 to 540
60 to 960
Stiffness to Weight: Axial, points 14
7.1
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 18 to 31
11 to 17
Strength to Weight: Bending, points 25 to 37
13 to 17
Thermal Diffusivity, mm2/s 65
37
Thermal Shock Resistance, points 7.6 to 13
11 to 17

Alloy Composition

Aluminum (Al), % 95.6 to 98.2
0
Copper (Cu), % 0 to 0.25
65 to 68
Iron (Fe), % 0 to 0.7
0 to 0.070
Lead (Pb), % 0
1.5 to 2.5
Magnesium (Mg), % 0.8 to 1.3
0
Manganese (Mn), % 1.0 to 1.5
0
Silicon (Si), % 0 to 0.3
0
Zinc (Zn), % 0 to 0.25
29 to 33.5
Residuals, % 0
0 to 0.4