MakeItFrom.com
Menu (ESC)

3005 Aluminum vs. EN 1.3960 Stainless Steel

3005 aluminum belongs to the aluminum alloys classification, while EN 1.3960 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3005 aluminum and the bottom bar is EN 1.3960 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 1.1 to 16
34
Fatigue Strength, MPa 53 to 100
220
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
78
Tensile Strength: Ultimate (UTS), MPa 140 to 270
590
Tensile Strength: Yield (Proof), MPa 51 to 240
270

Thermal Properties

Latent Heat of Fusion, J/g 400
290
Maximum Temperature: Mechanical, °C 180
970
Melting Completion (Liquidus), °C 660
1440
Melting Onset (Solidus), °C 640
1400
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 160
15
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 42
2.2
Electrical Conductivity: Equal Weight (Specific), % IACS 140
2.6

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
21
Density, g/cm3 2.8
7.9
Embodied Carbon, kg CO2/kg material 8.2
4.1
Embodied Energy, MJ/kg 150
57
Embodied Water, L/kg 1180
160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.2 to 18
170
Resilience: Unit (Modulus of Resilience), kJ/m3 18 to 390
190
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 49
25
Strength to Weight: Axial, points 14 to 27
21
Strength to Weight: Bending, points 21 to 33
20
Thermal Diffusivity, mm2/s 64
3.9
Thermal Shock Resistance, points 6.0 to 12
17

Alloy Composition

Aluminum (Al), % 95.7 to 98.8
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0 to 0.1
16.5 to 18.5
Copper (Cu), % 0 to 0.3
0
Iron (Fe), % 0 to 0.7
60.2 to 67.9
Magnesium (Mg), % 0.2 to 0.6
0
Manganese (Mn), % 1.0 to 1.5
0 to 2.0
Molybdenum (Mo), % 0
2.5 to 3.0
Nickel (Ni), % 0
13 to 15
Nitrogen (N), % 0
0.15 to 0.25
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 0 to 0.6
0 to 1.0
Sulfur (S), % 0
0 to 0.020
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0