MakeItFrom.com
Menu (ESC)

3005 Aluminum vs. S28200 Stainless Steel

3005 aluminum belongs to the aluminum alloys classification, while S28200 stainless steel belongs to the iron alloys. There are 27 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3005 aluminum and the bottom bar is S28200 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 33 to 73
260
Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 1.1 to 16
45
Fatigue Strength, MPa 53 to 100
430
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
77
Shear Strength, MPa 84 to 150
610
Tensile Strength: Ultimate (UTS), MPa 140 to 270
870
Tensile Strength: Yield (Proof), MPa 51 to 240
460

Thermal Properties

Latent Heat of Fusion, J/g 400
290
Maximum Temperature: Mechanical, °C 180
900
Melting Completion (Liquidus), °C 660
1380
Melting Onset (Solidus), °C 640
1330
Specific Heat Capacity, J/kg-K 900
480
Thermal Expansion, µm/m-K 23
18

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
12
Density, g/cm3 2.8
7.6
Embodied Carbon, kg CO2/kg material 8.2
2.8
Embodied Energy, MJ/kg 150
41
Embodied Water, L/kg 1180
160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.2 to 18
330
Resilience: Unit (Modulus of Resilience), kJ/m3 18 to 390
540
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 49
26
Strength to Weight: Axial, points 14 to 27
32
Strength to Weight: Bending, points 21 to 33
27
Thermal Shock Resistance, points 6.0 to 12
17

Alloy Composition

Aluminum (Al), % 95.7 to 98.8
0
Carbon (C), % 0
0 to 0.15
Chromium (Cr), % 0 to 0.1
17 to 19
Copper (Cu), % 0 to 0.3
0.75 to 1.3
Iron (Fe), % 0 to 0.7
57.7 to 64.1
Magnesium (Mg), % 0.2 to 0.6
0
Manganese (Mn), % 1.0 to 1.5
17 to 19
Molybdenum (Mo), % 0
0.75 to 1.3
Nitrogen (N), % 0
0.4 to 0.6
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.6
0 to 1.0
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0