MakeItFrom.com
Menu (ESC)

3102 Aluminum vs. AISI 441 Stainless Steel

3102 aluminum belongs to the aluminum alloys classification, while AISI 441 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3102 aluminum and the bottom bar is AISI 441 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
200
Elongation at Break, % 23 to 28
23
Fatigue Strength, MPa 31 to 34
180
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
77
Shear Strength, MPa 58 to 65
300
Tensile Strength: Ultimate (UTS), MPa 92 to 100
470
Tensile Strength: Yield (Proof), MPa 28 to 34
270

Thermal Properties

Latent Heat of Fusion, J/g 400
280
Maximum Temperature: Mechanical, °C 180
910
Melting Completion (Liquidus), °C 640
1440
Melting Onset (Solidus), °C 640
1400
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 230
23
Thermal Expansion, µm/m-K 23
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 56
2.7
Electrical Conductivity: Equal Weight (Specific), % IACS 190
3.1

Otherwise Unclassified Properties

Base Metal Price, % relative 9.0
13
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 8.2
2.8
Embodied Energy, MJ/kg 150
41
Embodied Water, L/kg 1190
130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 16 to 22
92
Resilience: Unit (Modulus of Resilience), kJ/m3 5.8 to 8.3
190
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 9.4 to 10
17
Strength to Weight: Bending, points 17 to 18
17
Thermal Diffusivity, mm2/s 92
6.1
Thermal Shock Resistance, points 4.1 to 4.4
16

Alloy Composition

Aluminum (Al), % 97.9 to 99.95
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0
17.5 to 19.5
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.7
76 to 82.2
Manganese (Mn), % 0.050 to 0.4
0 to 1.0
Nickel (Ni), % 0
0 to 1.0
Niobium (Nb), % 0
0.3 to 0.9
Nitrogen (N), % 0
0 to 0.030
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.4
0 to 1.0
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.1
0.1 to 0.5
Zinc (Zn), % 0 to 0.3
0
Residuals, % 0 to 0.15
0