MakeItFrom.com
Menu (ESC)

3102 Aluminum vs. C19010 Copper

3102 aluminum belongs to the aluminum alloys classification, while C19010 copper belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3102 aluminum and the bottom bar is C19010 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
120
Elongation at Break, % 23 to 28
2.4 to 22
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 26
43
Shear Strength, MPa 58 to 65
210 to 360
Tensile Strength: Ultimate (UTS), MPa 92 to 100
330 to 640
Tensile Strength: Yield (Proof), MPa 28 to 34
260 to 620

Thermal Properties

Latent Heat of Fusion, J/g 400
210
Maximum Temperature: Mechanical, °C 180
200
Melting Completion (Liquidus), °C 640
1060
Melting Onset (Solidus), °C 640
1010
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 230
260
Thermal Expansion, µm/m-K 23
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 56
48 to 63
Electrical Conductivity: Equal Weight (Specific), % IACS 190
48 to 63

Otherwise Unclassified Properties

Base Metal Price, % relative 9.0
31
Density, g/cm3 2.7
8.9
Embodied Carbon, kg CO2/kg material 8.2
2.7
Embodied Energy, MJ/kg 150
42
Embodied Water, L/kg 1190
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 16 to 22
7.3 to 140
Resilience: Unit (Modulus of Resilience), kJ/m3 5.8 to 8.3
290 to 1680
Stiffness to Weight: Axial, points 14
7.3
Stiffness to Weight: Bending, points 50
18
Strength to Weight: Axial, points 9.4 to 10
10 to 20
Strength to Weight: Bending, points 17 to 18
12 to 18
Thermal Diffusivity, mm2/s 92
75
Thermal Shock Resistance, points 4.1 to 4.4
12 to 23

Alloy Composition

Aluminum (Al), % 97.9 to 99.95
0
Copper (Cu), % 0 to 0.1
97.3 to 99.04
Iron (Fe), % 0 to 0.7
0
Manganese (Mn), % 0.050 to 0.4
0
Nickel (Ni), % 0
0.8 to 1.8
Phosphorus (P), % 0
0.010 to 0.050
Silicon (Si), % 0 to 0.4
0.15 to 0.35
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.3
0
Residuals, % 0
0 to 0.5