MakeItFrom.com
Menu (ESC)

3105 Aluminum vs. EN 1.4833 Stainless Steel

3105 aluminum belongs to the aluminum alloys classification, while EN 1.4833 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3105 aluminum and the bottom bar is EN 1.4833 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 29 to 67
170
Elastic (Young's, Tensile) Modulus, GPa 69
200
Elongation at Break, % 1.1 to 20
38
Fatigue Strength, MPa 39 to 95
200
Poisson's Ratio 0.33
0.27
Shear Modulus, GPa 26
78
Shear Strength, MPa 77 to 140
410
Tensile Strength: Ultimate (UTS), MPa 120 to 240
600
Tensile Strength: Yield (Proof), MPa 46 to 220
240

Thermal Properties

Latent Heat of Fusion, J/g 400
300
Maximum Temperature: Mechanical, °C 180
1000
Melting Completion (Liquidus), °C 660
1410
Melting Onset (Solidus), °C 640
1370
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 170
15
Thermal Expansion, µm/m-K 24
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 44
2.2
Electrical Conductivity: Equal Weight (Specific), % IACS 140
2.6

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
19
Density, g/cm3 2.8
7.8
Embodied Carbon, kg CO2/kg material 8.2
3.5
Embodied Energy, MJ/kg 150
50
Embodied Water, L/kg 1180
170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.6 to 19
180
Resilience: Unit (Modulus of Resilience), kJ/m3 15 to 340
140
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 12 to 24
21
Strength to Weight: Bending, points 20 to 31
20
Thermal Diffusivity, mm2/s 68
4.0
Thermal Shock Resistance, points 5.2 to 11
13

Alloy Composition

Aluminum (Al), % 96 to 99.5
0
Carbon (C), % 0
0 to 0.15
Chromium (Cr), % 0 to 0.2
22 to 24
Copper (Cu), % 0 to 0.3
0
Iron (Fe), % 0 to 0.7
58.7 to 66
Magnesium (Mg), % 0.2 to 0.8
0
Manganese (Mn), % 0.3 to 0.8
0 to 2.0
Nickel (Ni), % 0
12 to 14
Nitrogen (N), % 0
0 to 0.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.6
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.4
0
Residuals, % 0 to 0.15
0