3105 Aluminum vs. EN 1.5522 Steel
3105 aluminum belongs to the aluminum alloys classification, while EN 1.5522 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 3105 aluminum and the bottom bar is EN 1.5522 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 29 to 67 | |
140 to 190 |
Elastic (Young's, Tensile) Modulus, GPa | 69 | |
190 |
Elongation at Break, % | 1.1 to 20 | |
11 to 21 |
Fatigue Strength, MPa | 39 to 95 | |
210 to 330 |
Poisson's Ratio | 0.33 | |
0.29 |
Shear Modulus, GPa | 26 | |
73 |
Shear Strength, MPa | 77 to 140 | |
320 to 380 |
Tensile Strength: Ultimate (UTS), MPa | 120 to 240 | |
450 to 1490 |
Tensile Strength: Yield (Proof), MPa | 46 to 220 | |
300 to 520 |
Thermal Properties
Latent Heat of Fusion, J/g | 400 | |
250 |
Maximum Temperature: Mechanical, °C | 180 | |
400 |
Melting Completion (Liquidus), °C | 660 | |
1460 |
Melting Onset (Solidus), °C | 640 | |
1420 |
Specific Heat Capacity, J/kg-K | 900 | |
470 |
Thermal Conductivity, W/m-K | 170 | |
51 |
Thermal Expansion, µm/m-K | 24 | |
13 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 44 | |
7.1 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 140 | |
8.1 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 9.5 | |
1.9 |
Density, g/cm3 | 2.8 | |
7.8 |
Embodied Carbon, kg CO2/kg material | 8.2 | |
1.4 |
Embodied Energy, MJ/kg | 150 | |
19 |
Embodied Water, L/kg | 1180 | |
47 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 2.6 to 19 | |
45 to 250 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 15 to 340 | |
250 to 720 |
Stiffness to Weight: Axial, points | 14 | |
13 |
Stiffness to Weight: Bending, points | 50 | |
24 |
Strength to Weight: Axial, points | 12 to 24 | |
16 to 53 |
Strength to Weight: Bending, points | 20 to 31 | |
17 to 37 |
Thermal Diffusivity, mm2/s | 68 | |
14 |
Thermal Shock Resistance, points | 5.2 to 11 | |
13 to 44 |
Alloy Composition
Aluminum (Al), % | 96 to 99.5 | |
0 |
Boron (B), % | 0 | |
0.00080 to 0.0050 |
Carbon (C), % | 0 | |
0.2 to 0.24 |
Chromium (Cr), % | 0 to 0.2 | |
0 |
Copper (Cu), % | 0 to 0.3 | |
0 to 0.25 |
Iron (Fe), % | 0 to 0.7 | |
98 to 98.9 |
Magnesium (Mg), % | 0.2 to 0.8 | |
0 |
Manganese (Mn), % | 0.3 to 0.8 | |
0.9 to 1.2 |
Phosphorus (P), % | 0 | |
0 to 0.025 |
Silicon (Si), % | 0 to 0.6 | |
0 to 0.3 |
Sulfur (S), % | 0 | |
0 to 0.025 |
Titanium (Ti), % | 0 to 0.1 | |
0 |
Zinc (Zn), % | 0 to 0.4 | |
0 |
Residuals, % | 0 to 0.15 | |
0 |