MakeItFrom.com
Menu (ESC)

3105 Aluminum vs. SAE-AISI 1211 Steel

3105 aluminum belongs to the aluminum alloys classification, while SAE-AISI 1211 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3105 aluminum and the bottom bar is SAE-AISI 1211 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 29 to 67
140 to 180
Elastic (Young's, Tensile) Modulus, GPa 69
190
Elongation at Break, % 1.1 to 20
11 to 29
Fatigue Strength, MPa 39 to 95
200 to 280
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 77 to 140
280 to 350
Tensile Strength: Ultimate (UTS), MPa 120 to 240
430 to 580
Tensile Strength: Yield (Proof), MPa 46 to 220
260 to 460

Thermal Properties

Latent Heat of Fusion, J/g 400
250
Maximum Temperature: Mechanical, °C 180
400
Melting Completion (Liquidus), °C 660
1460
Melting Onset (Solidus), °C 640
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 170
52
Thermal Expansion, µm/m-K 24
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 44
7.0
Electrical Conductivity: Equal Weight (Specific), % IACS 140
8.0

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
1.8
Density, g/cm3 2.8
7.9
Embodied Carbon, kg CO2/kg material 8.2
1.4
Embodied Energy, MJ/kg 150
18
Embodied Water, L/kg 1180
46

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.6 to 19
61 to 110
Resilience: Unit (Modulus of Resilience), kJ/m3 15 to 340
180 to 550
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 12 to 24
15 to 21
Strength to Weight: Bending, points 20 to 31
16 to 20
Thermal Diffusivity, mm2/s 68
14
Thermal Shock Resistance, points 5.2 to 11
14 to 18

Alloy Composition

Aluminum (Al), % 96 to 99.5
0
Carbon (C), % 0
0 to 0.13
Chromium (Cr), % 0 to 0.2
0
Copper (Cu), % 0 to 0.3
0
Iron (Fe), % 0 to 0.7
98.7 to 99.23
Magnesium (Mg), % 0.2 to 0.8
0
Manganese (Mn), % 0.3 to 0.8
0.6 to 0.9
Phosphorus (P), % 0
0.070 to 0.12
Silicon (Si), % 0 to 0.6
0
Sulfur (S), % 0
0.1 to 0.15
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.4
0
Residuals, % 0 to 0.15
0